Others
Others
Evaluation of Aggregate Distribution Heterogeneity in 3D Printed Concrete by Means of X-ray CT
17/04/2024 -
The mechanical performance of a printed object in 3D concrete printing is influenced by the interfacial bonding strength between the deposited filaments. Hence, the physical properties of the layer...
Rheological and Functional Properties of Mechanically Recycled Post-Consumer Rigid Polyethylene Packaging Waste
17/04/2024 -
The properties of recycled post-consumer rigid polyethylene packaging waste were studied, using sorted waste washed in the laboratory with water alone and with added detergent, and compared with...
Developing Eco-Friendly 3D-Printing Composite Filament: Utilizing Palm Midrib to Reinforce High-Density Polyethylene Matrix in Design Applications
18/04/2024 -
Designers actively pursue the use of novel materials and concepts in furniture and interior design. By providing insights into their processing behavior and suitability for 3D-printing processes,...
FDM 3D Printing and Properties of PBAT/PLA Blends
18/04/2024 -
Biodegradable polylactic acid (PLA) has been widely used in fused deposition modeling (FDM) 3D printing. In order to improve its comprehensive properties in 3D printing, in this study, 0-40% content...
Interfacial control and dispersion characteristics of polylactic acid fiber/pulp fiber composites
12/04/2024 -
Processing of polylactic acid fibres/pulp fibres and the effect of pulp fibre concentration on molecular chains.To solve the problem of the dispersibility of pulp fiber in polylactic acid (PLA)/pulp...
Prednisolone Nanoprecipitation with Dean Instability Microfluidics Mixer
09/04/2024 -
Dean flow and Dean instability play an important role in inertial microfluidics, with a wide application in mixing and sorting. However, most studies are limited to Dean flow in the microscale. This...
Biocomposite Based on Polylactic Acid and Rice Straw for Food Packaging Products
10/04/2024 -
Plastic containers, commonly produced from non-biodegradable petroleum-based plastics such as polyethylene (PE), polypropylene (PP), and polyethylene terephthalate (PET), raise significant...
Enhancement of spent coffee grounds as biofiller in biodegradable polymer composite for sustainable packaging
08/04/2024 -
Sustainable packaging solution with spent coffee grounds microfiller.This study explores the utilization of Spent Coffee Grounds (SCG), a residual product of the coffee industry, as a microfiller...
Intensification of polyethylene devolatilization in twin?screw extruder with additives
06/04/2024 -
Extrusion devolatilization mechanism diagram.Aiming at the problem of difficult to remove high?carbon ??olefin in polyethylene, the influences of operation conditions and devolatilization additives...
An assessment of the role of nanosilica in thermal/thermo?oxidative degradation mechanism of poly(lactic acid)/polybutylene adipate terephthalate blend nanocomposites
04/04/2024 -
As a packaging materials candidate, based on a polylactic acid/ polybutylene adipate terephthalate (PLA/PBAT) blends (90/10 and 75/25 wt/wt) containing 1, 3, and 5 phr hydrophilic (HPL) and...
The Effect of Processing Conditions on the Microstructure of Homopolymer High-Density Polyethylene Blends: A Multivariate Approach
22/03/2024 -
In this work, a multivariate approach was utilized for gaining some insights into the processing–structure–properties relationships in polyethylene-based blends. In...
Characterization of Polylactic Acid Biocomposites Filled with Native Starch Granules from Dioscorea remotiflora Tubers
25/03/2024 -
Biocomposites were fabricated utilizing polylactic acid (PLA) combined with native starch sourced from mountain’s yam (Dioscorea remotiflora Knuth), an underexplored tuber variety....
Fabrication of robust polyamide 6 with local cross?linked structure via dynamic vulcanization
21/03/2024 -
The mechanical properties of toughened PA6.Polyamide 6 (PA6) is a widely used thermoplastic engineering polymer, and the toughening modification for PA6 is always a main research topic. Meanwhile,...
Preparation of transparent electrospun nanofibrous membrane from long?persistent phosphor?reinforced polymer for security authentication
17/03/2024 -
Eggshell processing produced an ecologically based additive, with great potential for manufacturing biopolyethylene matrix composites.AbstractLow?density biopolyethylene (BioLDPE) ecocomposites added...
Control of Meniscus Formation Using an Electrohydrodynamics Module in Roll-to-Roll Systems for the Stable Coating of Functional Layers
19/03/2024 -
In fabricating functional layers, including thin-film transistors and conductive electrodes, using roll-to-roll (R2R) processing on polymer-based PET film, the instability of the slot-die coating...
Development of a Polypropylene-Based Material with Flame-Retardant Properties for 3D Printing
21/03/2024 -
In this study, a nanocomposite based on a heterophasic polypropylene copolymer containing 5 wt% of nanoclays and 3 wt% of compatibilizer was formulated via melt compounding to obtain a material...
The Effects of Microcrystalline Cellulose Addition on the Properties of Wood–PLA Filaments for 3D Printing
18/03/2024 -
This paper describes the use of microcrystalline cellulose (MCC) as an additive in wood-polylactic acid (PLA) filaments suitable for 3D printing. Filaments prepared with PLA, thermally modified (TM)...
Morphology and Compressive Properties of Extruded Polyethylene Terephthalate Foam
12/03/2024 -
The cell structure and compressive properties of extruded polyethylene terephthalate (PET) foam with different densities were studied. The die of the PET foaming extruder is a special multi-hole...
A detailed study on static and dynamic mechanical properties of graphene oxide reinforced polyamide-6 composites
11/03/2024 -
Abstract The excellent mechanical strength along with oxygen containing functional groups at their surfaces of graphene oxide (GO) sheets ensure very good mechanical...
Properties of polylactic acid blends with potato thermoplastic starch using maleated polyethylene as a compatibilizer
28/02/2024 -
Schematic diagram of polymer film fabrication process.AbstractIn the present work, we report the effect of low?temperature plasma treatment on thermal, mechanical, and biodegradable properties of...
Ku-Band Mixers Based on Random-Oriented Carbon Nanotube Films
29/02/2024 -
Carbon nanotubes (CNTs) are a type of nanomaterial that have excellent electrical properties such as high carrier mobility, high saturation velocity, and small inherent capacitance, showing great...
