Others

 

Others

ISO 23930:2023 - Fibre-reinforced plastic composites — Full-section compressive test for pultruded profiles
- This document specifies a method for determining the compressive properties in the pultruded fibre reinforced plastic (FRP) using full-section compressive tests.It is applicable to...
D4475 Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method has been revised to D4475-21
- Significance and Use 5.1 Apparent shear strength determined by this test method is useful for quality control and specification purposes. It is also applicable to research and...
D7745 Standard Practice for Testing Pultruded Composites has been revised to D7745-19
- Significance and Use 4.1 This practice is intended to aid in the selection of test protocols for reinforced pultruded composites. 4.2 This practice is...
ISO 10406-3:2019 - Fibre-reinforced polymer (FRP) reinforcement of concrete -- Test methods -- Part 3: CFRP strips
01/07/2019 - This document specifies test methods applicable to unidirectional carbon fibre-reinforced polymer (CFRP) strips as external-bonded reinforcements on the concrete substrate.This document...
D8069 Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending has been revised to D8069-17a
- Significance and Use 5.1 Determination of flexural modulus by this test method is especially useful for quality control and specification purposes. ...
D5028 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis has been revised to D5028-17
- Significance and Use 5.1 Differential scanning calorimeters are used to determine chemical reaction thermal profiles of materials. One such reaction is the curing of...
D3647 Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition has been revised to D3647-16
- Abstract This practice outlines a method for classifying reinforced plastic pultruded shapes according to their composition. In classifying the reinforced plastic pultruded...
D3914 Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod has been reapproved, available as D3914-02(2016)
- Significance and Use 5.1 Shear tests of various kinds are widely used in the reinforced plastics industry to assess the strength of the reinforcement-to-resin bond in...
D3916 Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod has been reapproved, available as D3916-08(2016)
- Significance and Use 3.1 The high axial-tensile strength and the low transverse-compressive strength of pultruded rod combine to present some unique problems in...
D4475 Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method has been reapproved, available as D4475-02(2016)
- Significance and Use 4.1 Apparent shear strength determined by this test method is useful for quality control and specification purposes. It is also applicable to research...
D3917 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes has been revised to D3917-15a
- Abstract This specification defines the dimensional tolerances of standard rods, bars, and shapes pultruded from thermosetting glass-reinforced plastics. Tolerances cover...
D3917 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes has been editorially changed, available as D3917-15e1
- Abstract This specification defines the dimensional tolerances of standard rods, bars, and shapes pultruded from thermosetting glass-reinforced plastics. Tolerances cover...
D3917 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes has been revised to D3917-15
- Abstract This specification defines the dimensional tolerances of standard rods, bars, and shapes pultruded from thermosetting glass-reinforced plastics. Tolerances cover...
D4476/D4476M Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods has been revised (with designation change) to D4476/D4476M-14
- Significance and Use 5.1 Flexural properties determined by this test method are especially useful for quality control and specification purposes. ...
D4385 Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products has been revised to D4385-13
- Abstract This practice focuses on the establishment of acceptance levels and criteria upon inspection of visual defects in thermosetting reinforced plastic pultruded rods,...
D3917 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes has been revised to D3917-12
- Abstract This specification defines the dimensional tolerances of standard rods, bars, and shapes pultruded from thermosetting glass-reinforced plastics. Tolerances cover dimensional...
Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes has been revised to D3917-12
- Abstract This specification defines the dimensional tolerances of standard rods, bars, and shapes pultruded from thermosetting glass-reinforced plastics....