Others

 

Others

Numerical simulation of the blade coating processes using viscoelastic fluid with heat transfer analysis
20/04/2024 - Configuration of Blade coating process and pressure profile. The temperature distribution decreases with increasing the value of the material parameter ?2 for both plane and exponential coater. The...
Control of Meniscus Formation Using an Electrohydrodynamics Module in Roll-to-Roll Systems for the Stable Coating of Functional Layers
19/03/2024 - In fabricating functional layers, including thin-film transistors and conductive electrodes, using roll-to-roll (R2R) processing on polymer-based PET film, the instability of the slot-die coating...
Amorphous, Carbonated Calcium Phosphate and Biopolymer-Composite-Coated Si3N4/MWCNTs as Potential Novel Implant Materials
29/01/2024 - A biodegradable amorphous carbonated calcium phosphate (caCP)-incorporated polycaprolactone (PCL) composite layer was successfully deposited by a spin coater. In this specific coating, the PCL acts...
Plasma-Treated Electrospun PLGA Nanofiber Scaffold Supports Limbal Stem Cells
27/10/2023 - The corneal epithelial layer is continuously replaced by limbal stem cells. Reconstructing this layer in vitro using synthetic scaffolds is highly needed. Poly-lactic-co-glycolic acid (PLGA) is...
Determination of the Size of Complex Iron Oxide Nanoparticles Using Various Physical Experimental Methods
12/09/2023 - A series of organically coated iron oxide nanoparticles obtained via the thermal decomposition of iron–oleate complexes via a “heating-up” process were...
Quantum dots decorated photoanodes in bioelectrochemical fuel cells: Enhanced electricity generation using green algae
20/06/2023 - The (indium tin oxide) electrode, square slides (2.5?×?2.5?cm2) coated with CQD by using a spin coater to obtain a transparent photoanode. Cathode electrodes are a layer of flat carbon sheets with a...
An Innovative Design for the Fabrication of Flexible Composite Films from Si3N4 Fiber Paper
18/04/2023 - Several?millimeter?long silicon nitride fibers are fabricated from commercial Si powder using a simple method that is amenable to mass production. Then, superthin (15??m) Si3N4 paper is prepared...
Optimization of the Mung Bean Seed Coating with Alginate in a Bottom-Sprayed Wurster Fluidized Bed Coater
06/03/2023 - Seed coating is used to improve seed handling or target the delivery of different active ingredients: (micro)nutrients and biofortifying minerals, plant biostimulants, and plant protection compounds....
Review of CFD-DEM Modeling of Wet Fluidized Bed Granulation and Coating Processes
26/01/2023 - Wet fluidized bed granulation and coating processes have been widely used in the pharmaceutical and food industries. The complex gas–solid flow coupled with heat and mass transfer in...
Preparation and optical properties of AgNWs/WO3:Eu3+ composite film
09/11/2022 - Abstract Nano-WO3:EU3+ powder was prepared by Pechini method under acidic and alkaline condition, and the prepared acidic nano-WO3:Eu3+ mixed with the silver nanowires (AgNWs) in...
Artificial neural network modeling of tablet coating in a pan coater
17/10/2022 - AbstractOur study decided to use the new and revolutionary approach in the field of pharmaceutical coating processes called the artificial neural network (ANN) by using the neural networks toolbox...
Evaluation of Industrial Hemp Seed Treatments for Management of Damping-Off for Enhanced Stand Establishment
23/04/2022 - The purpose of this research was to collect efficacy data on biological, biochemical, and chemical fungicide seed treatments on hemp (Cannabis sativa L.) to mitigate damping-off and enhance field...
Preparation and characterization of PVOH/kaolin and PVOH/talc coating dispersion by one-step process
21/03/2022 - AbstractThe poor barrier of cellulosic paper against water vapor and oil limits its wide application as a packaging material. Lamination, extrusion, and dispersion coating are applied on paper...
Preparation and characterization of highly elongated polydimethylsiloxane nanosheets
01/03/2022 - Polydimethylsiloxane (PDMS) is a biocompatible polymer that exhibits high flexibility and heat resistance. PDMS can be rapidly cross?linked at low temperatures by a platinum?catalyzed addition...
Shear-induced assembly of high-aspect-ratio graphene nanoribbon nanosheets in a confined microchannel: Membrane fabrication for ultrafast organic solvent nanofiltration
01/05/2022 - One-dimensional graphene oxide nanoribbons (GONRs) were self-assembled into two-dimensional (2D) nanosheets using the shear and confinement effect during a slot-die coating process. An aqueous...
The Optimization of Dispersion and Application Techniques for Nanocarbon-Doped Mixed Matrix Gas Separation Membranes
- In this work, supported cellulose acetate (CA) mixed matrix membranes (MMMs) were prepared and studied concerning their gas separation behaviors. The dispersion of carbon nanotube fillers were...
Electrospun PVA Polymer Embedded with Ceria Nanoparticles as Silicon Solar Cells Rear Surface Coaters for Efficiency Improvement
04/06/2018 - This paper introduces electrospun nanofibers embedded with ceria nanoparticles as silicon solar cells coaters, showing their influence on the solar cells efficiency. Ceria nanoparticles can be...
Lanthanide-Doped Ceria Nanoparticles as Backside Coaters to Improve Silicon Solar Cell Efficiency
23/05/2018 - This paper introduces lanthanide-doped ceria nanoparticles as silicon solar cell back-side coaters, showing their influence on the solar cell efficiency. Ceria nanoparticles can be synthesized to...
An analysis of the mini-tablet fluidized bed coating process
01/06/2018 - Mini-tablets with diameters of 2.0, 2.5, and 3.0mm are coated in two different lab-scale fluidized bed coaters equipped with a Wurster draft tube. The main focus of the research is to evaluate the...