Extrusion
Extrusion
Synergistic effect of SiO2 doped g-C3N4 and ammonium polyphosphate on flame retardancy of PA6 composites
20/09/2023 -
Abstract The combination of nitrogen and phosphorus compounds has synergistic flame retardant effect, but the addition of low phosphorus content compounds is large, which...
Influence of Extruded Tubing and Foam-Filler Material Pairing on the Energy Absorption of Composite AA6061/PVC Structures
19/09/2023 -
There is accelerating demand for energy-absorbing structures fabricated from lightweight materials with idealized, near-constant force responses to simultaneously resolve the engineering challenges...
Design and Modification of a Material Extrusion 3D Printer to Manufacture Functional Gradient PEEK Components
19/09/2023 -
In recent years, the creative use of polymers has been expanded as the range of achievable material properties and options for manufacturing and post-processing continually grows. The main goal of...
Influence of Three-Dimensional Printing Parameters on Compressive Properties and Surface Smoothness of Polylactic Acid Specimens
19/09/2023 -
While the mechanical performance of fused filament fabrication (FFF) parts has been extensively studied in terms of the tensile and bending strength, limited research accounts for their compressive...
Investigation on the Influence of Process Parameters on the Mechanical Properties of Extruded Bio-Based and Biodegradable Continuous Fiber-Reinforced Thermoplastic Sheets
20/09/2023 -
The use of bio-based and biodegradable matrix materials in fiber-reinforced polymers (FRPs) is an approach to reduce the consumption of fossil resources and the amount of polymer waste. This study...
Systematic Evaluation of Research Progress in the Textile Field over the Past 10 Years: Bibliometric Study on Smart Textiles and Clothing
20/09/2023 -
Intelligent textile clothing is one of the most popular topics in the field. In recent decades, rapid advances have been made in the area of intelligent textile clothing research, and the...
An Experimental Approach to Determining the Average Diffusion Coefficient of Volatile Components in Polymer Waste Materials
21/09/2023 -
One of the major challenges in recycling plastics is the removal of undesired volatile components from the polymeric phase, which may reduce process efficiency and negatively affect product quality....
Interrelationships between process parameters, cross?sectional geometry, fracture behavior, and mechanical properties in material extrusion additive manufacturing
19/09/2023 -
The tensile behavior of a model additively manufactured polycarbonate system is investigated to explore what leads to different tensile properties. Printing at high speeds leads to improved...
Effect of SiC Particle Size on the Mechanical and Wear Behavior of Al356 Metal Matrix Composites
19/09/2023 -
This study investigates the mechanical properties and wear behavior of SiC reinforced Al356 metal matrix (AlSiMg) composite materials produced by the method of powder metallurgy. Samples of...
3D printed polylactide based zirconia toughened alumina composites: fabrication, mechanical and in vitro evaluation
14/09/2023 -
Fused deposition modeling (FDM) has been a commonly used technique in the fabrication of geometrically complex biodegradable scaffolds for bone tissue engineering. Generally, either individual...
Influence of the Print Envelope Temperature on the Morphology and Tensile Properties of Thermoplastic Polyolefins Fabricated by Material Extrusion and Material Jetting Additive Manufacturing
16/09/2023 -
Additive manufacturing (AM) nowadays has become a supportive method of traditional manufacturing. In particular, the medical and healthcare industry can profit from these developments in terms of...
The Optimization of Pressure-Assisted Microsyringe (PAM) 3D Printing Parameters for the Development of Sustainable Starch-Based Patches
17/09/2023 -
The aim of this work was to develop sustainable patches for wound application, using the biopolymer starch, created using a low-cost 3D printing PAM device. The composition of a starch gel was...
Effect of the Encapsulation Process on the Viability of Probiotics in a Simulated Gastrointestinal Tract Model Medium
15/09/2023 -
The primary objective of this study was to investigate the survival rate of three species of encapsulated bacteria (Propionibacterium acidipropionicici, Propionibacterium freudenreichii, and...
Synthesis and properties of multi?armed polycarboxylate superplasticizer modified by ??cyclodextrin
13/09/2023 -
Effectiveness of modified lignin on poly(butylene adipate?co?terephthalate)/poly(lactic acid) mulch film performance.AbstractIn this work, the biodegradable poly(butylene adipate?co?terephthalate)...
Investigation of interdiffusion between compatible polymers under static and co?extrusion processing conditions
11/09/2023 -
The properties of ultralight and superelastic multifunctional PI composite aerogels.AbstractHigh?performance and lightweight electromagnetic wave?absorbing materials with broad frequency bandwidths...
Simple Determination of the Melt Flow Index of Composite Polymer Filaments Used in Material Extrusion Additive Manufacturing
12/09/2023 -
The mechanical properties improving filler introduction into polymer filaments often lead to the formation of defects in 3D-printed products. Studying the bulk modification of polyethylene...
Modeling and Simulation of 3D Food Printing Systems—Scope, Advances, and Challenges
13/09/2023 -
Food 3D printing is a computer-aided additive manufacturing technology that can transform foods into intricate customized forms. In the past decade, this field has phenomenally advanced and one...
Advanced Composite Materials Utilized in FDM/FFF 3D Printing Manufacturing Processes: The Case of Filled Filaments
14/09/2023 -
The emergence of additive manufacturing technologies has brought about a significant transformation in several industries. Among these technologies, Fused Deposition Modeling/Fused Filament...
Enhancing Dielectric Properties, Thermal Conductivity, and Mechanical Properties of Poly(lactic acid)–Thermoplastic Polyurethane Blend Composites by Using a SiC–BaTiO3 Hybrid Filler
12/09/2023 -
A composite of polymer blends—thermoplastic polyurethane (TPU) and poly(lactic acid) (PLA)—and BaTiO3–SiC was fabricated. BaTiO3 particles were used to...
Dimension effect on thermal conductivity of hexagonal boron nitride/titanium dioxide reinforced hybrid PEEK composites developed with a scalable compounding approach
11/09/2023 -
In?plane and through?plane thermal conductivity enhancement (%) of PEEK/hBN/TiO2 hybrid composites. Numerical simulation results showing the efficient through?plane heat transfer of 50B?10T specimen....
Design and Implementation of an Accessible 3D Bioprinter: Benchmarking the Performance of a Home-Made Bioprinter against a Professional Bioprinter
11/09/2023 -
The tremendous application potential of 3D bioprinting in the biomedical field is witnessed by the ever-increasing interest in this technology over the past few years. In particular, the possibility...
