Packaging
Packaging
Robust Chemiresistive Behavior in Conductive Polymer/MOF Composites
17/04/2024 -
Metal?organic frameworks (MOFs) are promising materials for gas sensing but are often limited to single?use detection. We demonstrate a hybridization strategy synergistically deploying conductive...
Boosting External Quantum Efficiency of Blue Perovskite QLEDs Exceeding 23% by Trifluoroacetate Passivation and Mixed Hole Transportation Design
17/04/2024 -
Perovskite quantum dot?based light?emitting diodes (QLEDs) have been considered a promising display technology due to their wide color gamut for authentic color expression. Currently, the external...
Aerosol?Synthesized Surfactant?Free Single?Walled Carbon Nanotube?Based NO2 Sensors: Unprecedentedly High Sensitivity and Fast Recovery
16/04/2024 -
NO2 chemical sensors using aerosol?synthesized single?walled carbon nanotubes demonstrate unprecedently high sensitivity, ultrafast response/recovery, and low limit of detection. This is owing to the...
Directly?Fused Ni(II)Porphyrin Conjugated Polymers with Blocked meso?positions: Impact on Electrocatalytic Properties
17/04/2024 -
The oxidative coupling reaction of two Ni(II) porphyrins meso?substituted with three and four phenyl groups, Ni(II) 5,10,15?(triphenyl)porphyrin (NiPh3P) and Ni(II) 5,10,15,20?(tetraphenyl)porphyrin...
Enhancing the UV resistance and flame retardancy of epoxy resin composites with fluorescent carbon dots
15/04/2024 -
The flexible piezoresistive tactile sensor (FPTS) preparation process. (a) Preparation of multiwalled carbon nanotubes (MWCNTs) solution. (b) Preparation of polydimethylsiloxane (PDMS) solution. (c)...
Isocyanate?chitin modified microspheres for chiral drug separation in high performance liquid chromatography
16/04/2024 -
Preparation process diagram of MWCNTs/PANI@MWCNTs/PAN fiber.AbstractWearable smart sensors have broad prospects in medical health and physical exercise. In this study, the core–shell conductive...
Preparation and properties of pale?colored and optically transparent fluoro?containing polyimide films with low solar absorptivity and enhanced high?temperature dimensional stability for potential applications in space environments
17/04/2024 -
We studied the reprocessable poly(1,2,3?triazolium) (PTAM) based on the dynamic reversible crosslinking 1,2,3?triazolium. PTAM could achieve stress relaxation within 2?min at 160°C. And PTAM could...
Cobalt-based metal–organic framework (Co-MOF) thin films with high capacitance for supercapacitor electrode
17/04/2024 -
Abstract One of the advanced forms of energy storage is the supercapacitor, which offers many advantages including high power density and fast charging and discharging rates....
Gummy?inspired natural eutectogels with high adhesiveness, toughness and humidity response
17/04/2024 -
Biogel?based ionic devices have emerged as versatile platforms for broad applications in wearable electronics, healthcare monitoring and bioelectronic interfaces. Electronic functions derived from...
Structural Design and Performance Optimization of Green Concrete Based on Recycled Pumice and Modified Rubber Powder
17/04/2024 -
With the increasing severity of global climate change and environmental degradation, countries have put forward strategies to reduce carbon emissions and promote sustainable development. The...
Influence of DMSO Non-Toxic Solvent on the Mechanical and Chemical Properties of a PVDF Thin Film
16/04/2024 -
Piezoelectric materials such as PVDF and its copolymers have been widely studied in different areas and with promising applications, such as haptic feedback actuators or deformation sensors for...
Low-Temperature Deposition of Diamond Films by MPCVD with Graphite Paste Additive
-
Modern integrated circuits (ICs) take advantage of three-dimensional (3D) nanostructures in devices and interconnects to achieve high-speed and ultra-low-power performance. The choice of electrical...
Tribological Properties of Hard TiB2 Thin Films Prepared at Low Temperatures Using HiPIMS
16/04/2024 -
Magnetron-sputtered WS2 composite thin films are solid lubricants with excellent performances. However, the low hardness of the WS2 thin films necessitates the further improvement of their wear...
Controlling the Superconducting Critical Temperature and Resistance of NbN Films through Thin Film Deposition and Annealing
17/04/2024 -
This study investigated the relationship between the superconducting properties, electrical properties, sputtering process parameters, and post-growth annealing of NbN films. Four series of NbN films...
Preparation of Copper-Doped Zinc Oxide (CZO) Nanoparticles and CZO/Acrylic Copolymer Emulsion with Polyvinylpyrrolidone (PVP) Coated on Glass Substrate for Optical Properties
18/04/2024 -
This study investigated the effect of copper (Cu) doping content on zinc oxide with varied weight percentages and the dispersion of Cu-doped ZnO (CZO) by adding polyvinylpyrrolidone (PVP), coated on...
Design and Preparation of Bending-Resistant Flexible All-Solid Dye-Sensitized Solar Cells
18/04/2024 -
All-solid-state flexible dye-sensitized solar cells will not only expand the application scenarios of solar cells but also significantly extend the lifetime of solar cells. However, improving their...
Heterojunctions of Mercury Selenide Quantum Dots and Halide Perovskites with High Lattice Matching and Their Photodetection Properties
18/04/2024 -
Heterojunction semiconductors have been extensively applied in various optoelectronic devices due to their unique carrier transport characteristics. However, it is still a challenge to construct...
Plasmonic Au@Ag Core–Shell Nanoisland Film for Photothermal Inactivation and Surface-Enhanced Raman Scattering Detection of Bacteria
17/04/2024 -
Plasmonic metal nanomaterials have been extensively investigated for their utilizations in biomedical sensing and treatment. In this study, plasmonic Au@Ag core–shell nanoisland films...
Nanocrystalline Cubic Phase Scandium-Stabilized Zirconia Thin Films
18/04/2024 -
The cubic zirconia (ZrO2) is attractive for a broad range of applications. However, at room temperature, the cubic phase needs to be stabilized. The most studied stabilization method is the addition...
Understanding the Molecular Arrangement and Orientation Characteristics of Mesophase Pitch and Its Fibers via a Polarized Light Microscope
16/04/2024 -
A polarized light microscope (PLM) was utilized to examine the optical textures of mesophase pitch (MP) and MP-derived fibers, which aimed to reveal the arrangement and orientation characteristics of...
Suitability and Trueness of the Removable Partial Denture Framework Fabricating by Polyether Ether Ketone with CAD-CAM Technology
17/04/2024 -
The object of the study was to evaluate the suitability and trueness of the removable partial denture (RPD) framework fabricated by polyether ether ketone (PEEK) with the CAD-CAM technology in vitro....
