Packaging

 

Packaging

Strategies for Enhanced Optical Performance and Durability of VO2?based Thermochromic Windows
27/03/2024 - Due to the growing need for smart windows for buildings to reduce energy usage, vanadium dioxide (VO2) has been investigated as a potential material for thermochromic smart windows due to its ease of...
High Open?Circuit Voltage Organic Solar Cells with 19.2% Efficiency Enabled by Synergistic Side?Chain Engineering
27/03/2024 - Restricted by the energy?gap law, state?of?the?art organic solar cells (OSCs) exhibit relatively low open?circuit voltage (VOC; 0.8–0.9 V) because of large nonradiative energy losses. Moreover, the...
Raman spectroscopy and one?dimensional convolutional neural network modeling as a real?time monitoring tool for in vitro transaminase?catalyzed synthesis of a pharmaceutically relevant amine precursor
27/03/2024 - Raman spectroscopy has been used to measure the concentration of a pharmaceutically relevant model amine intermediate for positive allosteric modulators of nicotinic acetylcholine receptor in a...
Design of Induction Heatable Carbon?Based Foams for Catalysis
27/03/2024 - The development of catalyst supports with direct incorporation of the catalyst material and magnetically heatable particles during the foaming process is presented. The developed materials will be...
Robust Red?Absorbing Donor?Acceptor Stenhouse Adduct Photoswitches
27/03/2024 - Donor?Acceptor Stenhouse Adduct (DASA), a class of push?pull negative photochromes, has received large interest lately owing to its versatile synthesis, modularity and excellent photoswitching in...
Azulene?Containing Bis(squaraine) Dyes: Design, Synthesis and Aggregation Behaviors
26/03/2024 - Three azulene?containing bis(squaraine) dyes were synthesized, among which BSQ1 showed distinct aggregation behaviors from the other two dimers and demonstrated excellent photothermal conversion...
A General Concept for the Electronic and Steric Modification of 1?Metallacyclobuta?2,3?dienes: A Case Study of Group 4 Metallocene Complexes
26/03/2024 - The synthesis of group 4 metal 1?metallacyclobuta?2,3?dienes as organometallic analogues of elusive 1,2?cyclobutadiene has so far been limited to SiMe3 substituted examples. We present the synthesis...
Effective recovery of the nitritation process through hydrogen peroxide
28/03/2024 - This study successfully achieved stable nitritation by adding hydrogen peroxide (H2O2) to the nitrification sludge whose nitritation stability had been destroyed. The batch experiment demonstrated...
Synthesis, Characterisation, Hirshfeld surface analysis, Magnetic susceptibility, DFT calculations, pkCSM profile, and Biological activities of Novel mono?, di?, and multinuclear Cobalt (II) complexes
27/03/2024 - This study explores the synthesis and diverse properties of newly synthesised water?soluble cobalt (II) complexes (1?3). Analysis of the complexes through various methods, including Hirshfeld surface...
Dual cross?linking of XNBR latex with epoxy?functional calcium silicate particles for the production of accelerator?free medical gloves
26/03/2024 - (a) Preparation technology of SSP/EP composite, (b) thermal conductivity, and (c) flexural strength.AbstractIn recent years, the packaging industry has utilized electronic packaging materials with...
Development of antibacterial edible films for food packaging using tragacanth gum, carrageenan, and clove essential oil
27/03/2024 - Acrylonitrile butadiene styrene (ABS) composites were reinforced with basalt fiber (BF) and modified kraft lignin. Lignin was modified by adjusting the length of side?chain (C2?C4), and its function...
Titanium dioxide and silver nanoparticles applied in mineral paints for outdoor and indoor environments
27/03/2024 - AbstractHere, we have evaluated water-based paint formulations containing mineral binders, silver nanoparticles, and titanium dioxide. Scanning electron microscopy analysis of dried film samples...
Molecular dynamics simulation of the effects of intermolecular interactions on the diffusion mechanism of 1,2,3-benzotriazole in low density polyethylene
28/03/2024 - Abstract It is of great significance to understand the diffusion rate of the volatile corrosion inhibitor (VCI) in the VCI films for corrosion inhibition. The diffusion behavior...
Effect of alkali?treated Putranjiva roxburghii seed shell filler on physico?chemical, thermal, mechanical, and barrier properties of polyvinyl alcohol?based biofilms
27/03/2024 - Processing and characterization of polyvinyl alcohol?based biofilms.Biopolymers and bio?fillers derived from natural, organic, and abundant resources have garnered more responsiveness owing to their...
The Influence of an Innovative Bioproduct on Soil and Substrate Characteristics during Strawberry Cultivation
28/03/2024 - Farming systems should be sustainable in order to protect the soil from diseases and pests while preserving the environment and generating economic and social benefits. The use of biological products...
Hybrid-Margin Softmax for the Detection of Trademark Image Similarity
28/03/2024 - The detection of image similarity is critical to trademark (TM) legal registration and court judgment on infringement cases. Meanwhile, there are great challenges regarding the annotation of similar...
Analysis and Evaluation of Seed-Filling Performance of a Pneumatic Interference Precision Seeder for Small Cabbages
27/03/2024 - To address the current problems of poor seed-filling performance and seed leakage of the pneumatic seed filler for cabbage, we designed a pneumatic disturbing precision seed filler for cabbage based...
Large-Area Thickness Measurement of Transparent Films Based on a Multichannel Spectral Interference Sensor
27/03/2024 - Thickness measurement of thin films is essential for quality control in the manufacturing process of the semiconductor and display industries. Real-time monitoring of film thickness during production...
Stability Analysis of the Rapid Heating Multilayer Structure Mold by the Contact Error and Thickness of Layers
27/03/2024 - Rapid heating of the mold surface is necessary for the high-gloss, high-productivity injection molding process. A rapid heating mold system that uses a carbon nanotube (CNT) as a heating element was...
A Generalized Nonlinear Beam Element for Slender RC Members Using a Polygonization Section Approach—Part II: Verification of Analytical with Experimental Results
27/03/2024 - The proposed mathematical model, described in detail in Part I of the present paper, aims to solve the common numerical problems that currently characterize classic fiber models when used with a...
Optimizing the Thickness of Functionally Graded Lattice Structures for High-Performance Energy Absorption: A Case Study Based on a Bicycle Helmet
27/03/2024 - This study explores the complete production chain of designing, optimizing, and Additive Manufacturing (AM) of a helmet incorporating a functionally graded lattice structure (FGLS). The potential of...