Advanced materials

 

Advanced materials

Manipulating Stacking Fault Energy to Achieve Crack Inhibition and Superior Strength–Ductility Synergy in an Additively Manufactured High?Entropy Alloy
22/03/2024 - A novel strategy of manipulating stacking fault energy by lightweight and cost?effective Al?doping is proposed, to overcome the thermal?stress?induced cracking behavior which has long been regarded...
Atomic?Level Matching Metal?Ion Organic Hybrid Interface to Enhance Energy Storage of Polymer?Based Composite Dielectrics
22/03/2024 - In this work, a distinctive “metal?ion organic hybrid interface” (MOHI) between polyimide (PI) and calcium niobate (CNO) nanosheets was designed. The metal ions in the MOHI could achieve...
Exploring the Phytochemical Diversity and Antioxidant Potential of the Vietnamese Smilax glabra Roxb: Insights from UPLC-QTOF-MS/MS and Zebrafish Model Studies
- Abstract Research on natural products is growing due to their potential health benefits and medicinal properties. Despite regional variations in phytochemical composition and...
Cuminaldehyde and Tobramycin Forestall the Biofilm Threats of Staphylococcus aureus: A Combinatorial Strategy to Evade the Biofilm Challenges
- Abstract Staphylococcus aureus, an opportunistic Gram-positive pathogen, is known for causing various infections in humans, primarily by forming biofilms. The...
Nano-delivery Systems and Therapeutic Applications of Phytodrug Mangiferin
- Abstract In order to cure a range of ailments, scientists have investigated a number of bioactive antioxidant compounds produced from natural sources. Mangiferin, a C-glycosyl...
The Utilization of Metal?Organic Frameworks and Their Derivatives Composite in Supercapacitor Electrodes
23/03/2024 - Up to now, the mainstream adoption of renewable energy has brought about substantial transformations in the electricity and energy sector. This shift has garnered considerable attention within the...
Methodological Challenges in Accounting for Test Conditions When Determining the Static Elastic Modulus of Advanced Aramid Structural Fibers
25/03/2024 - Low-temperature oxidation in air of domestic poly-p-aramid complex threads based on poly(p-phenylene terephthalamide), i.e., terlon, Rusar, and Rusar NT, that were nitrated beforehand by...
Alkaline pretreatment and steam explosion process on coffee silverskin and incorporation of cellulose fibers in poly(butylene adipate?co?terephthalate)
21/03/2024 - A strategy to ensure the transmittance to polyimide films in transparent electronic devices.AbstractFor the past few years, colorless polyimide (CPI) has been drawn much attention for its application...
Textile waste-based cellulose composites: a review
22/03/2024 - Abstract Due to increased environmental awareness, the depletion of fossil fuels, and expanding ecological concerns, today’s society has a larger need for environmentally...
Aerospace, Vol. 11, Pages 253: Lunar Rover Collaborated Path Planning with Artificial Potential Field-Based Heuristic on Deep Reinforcement Learning
24/03/2024 - The International Lunar Research Station, to be established around 2030, will equip lunar rovers with robotic arms as constructors. Construction requires lunar soil and lunar rovers, for which rovers...
Graphene-Enhanced CuW Composites for High-Voltage Circuit Breaker Electrical Contacts
25/03/2024 - To address the issue of over-standard short-circuit currents in a power system, it is imperative to enhance the comprehensive performance of the electrical contacts, which serve as the lynchpin of...
Prediction and Factor Analysis of Liquefaction Ground Subsidence Based on Machine-Learning Techniques
23/03/2024 - Liquefaction is a significant challenge in the fields of earthquake risk assessment and soil dynamics, as it has the potential to cause extensive damage to buildings and infrastructure through ground...
Fused Deposition Modelling of Thermoplastic Polymer Nanocomposites: A Critical Review
- Fused deposition modelling (FDM) has attracted researchers’ interest in myriads of applications. The enhancement of its part using fillers to print nanocomposites is a cutting-edge...
Preparation, Isolation and Antioxidant Function of Peptides from a New Resource of Rumexpatientia L. ×Rumextianshanicus A. Los
22/03/2024 - Rumexpatientia L. ×Rumextianshanicus A. Los (RRL), known as “protein grass” in China, was recognized as a new food ingredient in 2021. However, the...
Determination of Biogenic Amine Level Variations upon Storage, in Chicken Breast Coated with Edible Protective Film
23/03/2024 - A new chitosan-based protective film containing rosemarinic acid (0.282% w/w) has been elaborated. The film was formed from a water–oil emulsion system and applied to poultry meat...
Application of Plant Oils as Functional Additives in Edible Films and Coatings for Food Packaging: A Review
25/03/2024 - Increasing environmental concerns over using petroleum-based packaging materials in the food industry have encouraged researchers to produce edible food packaging materials from renewable sources....
Research on the Effect of Natural Seawater in Domesticating Bacillus pasteurii and Reinforcing Calcareous Sand
25/03/2024 - Microbial-Induced Calcium Carbonate Precipitation (MICP) is an environmentally friendly, efficient, and sustainable new soil reinforcement technology. For this study, Bacillus pasteurii were...
Enhancing Water Resistance and Mechanical Properties of Cemented Soil with Graphene Oxide
22/03/2024 - Although cemented soil as a subgrade fill material can meet certain performance requirements, it is susceptible to capillary erosion caused by groundwater. In order to eliminate the hazards caused by...
An Overview of the Non-Energetic Valorization Possibilities of Plastic Waste via Thermochemical Processes
22/03/2024 - The recovery and recycling/upcycling of plastics and polymer-based materials is needed in order to reduce plastic waste accumulated over decades. Mechanical recycling processes have made a great...
Enhancing Fused Deposition Modeling Precision with Serial Communication-Driven Closed-Loop Control and Image Analysis for Fault Diagnosis-Correction
22/03/2024 - Additive manufacturing (AM) also commonly known as 3D printing is an advanced technique for manufacturing complex three-dimensional (3D) parts by depositing raw material layer by layer. Various...
Metal Laser-Based Powder Bed Fusion Process Development Using Optical Tomography
22/03/2024 - In this study, a set of 316 L stainless steel test specimens was additively manufactured by laser-based Powder Bed Fusion. The process parameters were varied for each specimen in terms of laser scan...