Advanced materials

 

Advanced materials

Methodological Challenges in Accounting for Test Conditions When Determining the Static Elastic Modulus of Advanced Aramid Structural Fibers
25/03/2024 - Low-temperature oxidation in air of domestic poly-p-aramid complex threads based on poly(p-phenylene terephthalamide), i.e., terlon, Rusar, and Rusar NT, that were nitrated beforehand by...
Alkaline pretreatment and steam explosion process on coffee silverskin and incorporation of cellulose fibers in poly(butylene adipate?co?terephthalate)
21/03/2024 - A strategy to ensure the transmittance to polyimide films in transparent electronic devices.AbstractFor the past few years, colorless polyimide (CPI) has been drawn much attention for its application...
Textile waste-based cellulose composites: a review
22/03/2024 - Abstract Due to increased environmental awareness, the depletion of fossil fuels, and expanding ecological concerns, today’s society has a larger need for environmentally...
Aerospace, Vol. 11, Pages 253: Lunar Rover Collaborated Path Planning with Artificial Potential Field-Based Heuristic on Deep Reinforcement Learning
24/03/2024 - The International Lunar Research Station, to be established around 2030, will equip lunar rovers with robotic arms as constructors. Construction requires lunar soil and lunar rovers, for which rovers...
Research on the Effect of Natural Seawater in Domesticating Bacillus pasteurii and Reinforcing Calcareous Sand
25/03/2024 - Microbial-Induced Calcium Carbonate Precipitation (MICP) is an environmentally friendly, efficient, and sustainable new soil reinforcement technology. For this study, Bacillus pasteurii were...
A Detailed Numerical Model for a New Composite Slim-Floor Slab System
22/03/2024 - The paper concerns the numerical modelling of a new slim-floor system with innovative steel–concrete composite beams called ”hybrid beams”. Hybrid beams...
Antarctic Snow Failure Mechanics: Analysis, Simulations, and Applications
25/03/2024 - Snow failure is the process by which the stability of snow or snow-covered slopes is destroyed, resulting in the collapse or release of snow. Heavy snowfall, low temperatures, and volatile weather...
Nonwoven Reinforced Photocurable Poly(glycerol sebacate)-Based Hydrogels
22/03/2024 - Implantable hydrogels should ideally possess mechanical properties matched to the surrounding tissues to enable adequate mechanical function while regeneration occurs. This can be challenging,...
Wear Behavior of Epoxy Resin Reinforced with Ceramic Nano- and Microparticles
22/03/2024 - Cavitation erosion poses a significant challenge in fluid systems like hydraulic turbines and ship propellers due to pulsed pressure from collapsing vapor bubbles. To combat this, various materials...
Development and characterization of kevlar and glass fibers reinforced epoxy/vinyl ester hybrid resin composites
21/03/2024 - Multi?resin hybrid composites laminate preparation.This research investigates the influence of kevlar and glass fiber reinforcements on the mechanical and thermal properties of epoxy/vinyl ester...
Mechanical behavior of glass fiber?reinforced hollow glass particles filled epoxy composites under moisture environment
22/03/2024 - Investigation of the moisture uptake behavior of glass fiber reinforced composites filled by hollow glass microspheres.The utilization of hollow glass particle?filled fiber?reinforced composites in...
Towpreg manufacturing and characterization for filament winding application
22/03/2024 - From dry fibres to towpregs; important parameters to be considered during manufacturing and usage.In the field of textile technology, this study centers on towpreg—an integral component utilized in...
Ratiometric Fluorescence Optical Fiber Enabling Operando Temperature Monitoring in Pouch?Type Battery
19/03/2024 - The polymer optical fiber based on the temperature?dependent fluorescence of NaLaTi2O6:Yb/Er phosphors is inserted into a pouch?type battery, and the continuous temperature variations are instantly...
Advancements in Cotton Textile Design: Addressing Temperature and Moisture Challenges
21/03/2024 - The primary objective of this study is to alleviate discomfort arising from fluctuations in heat and humidity due to environmental and personal factors, aiming to develop functional textiles...
Decomposition of Hemp Residues in Soil as Facilitated by Different Nitrogen Sources
21/03/2024 - Improving soil health across agroecosystems has continued to receive attention around the globe, with an emphasis on sustainable organic inputs from agricultural practice. It is well known that...
Research on Joint Optimization of Task Offloading and UAV Trajectory in Mobile Edge Computing Considering Communication Cost Based on Safe Reinforcement Learning
21/03/2024 - Due to CPU and memory limitations, mobile IoT devices face challenges in handling delay-sensitive and computationally intensive tasks. Mobile edge computing addresses this issue by offloading tasks...
Optimized Two-Tier Caching with Hybrid Millimeter-Wave and Microwave Communications for 6G Networks
20/03/2024 - Data caching is a promising technique to alleviate the data traffic burden from the backhaul and minimize data access delay. However, the cache capacity constraint poses a significant challenge to...
A State-of-the-Art Review on Structural Strengthening Techniques with FRPs: Effectiveness, Shortcomings, and Future Research Directions
19/03/2024 - In the pursuit of creating more sustainable and resilient structures, the exploration of construction materials and strengthening methodologies is imperative. Traditional methods of relying on steel...
Advanced Electrospinning Technology Applied to Polymer-Based Sensors in Energy and Environmental Applications
19/03/2024 - Due to its designable nanostructure and simple and inexpensive preparation process, electrospun nanofibers have important applications in energy collection, wearable sports health detection,...
Isobornyl and Isocamphyl Photostabilizers in Poly(lactic acid)-Based Electrospun Fibers
20/03/2024 - In this work, electrospun polylactide fibers with new photostabilizing additives, 4-methyl-2,6-diisobornylphenol (DIBP) and N-isocamphylaniline (NICA), have been tested under the influence of UV-C...
Development of an Immunocapture-Based Polymeric Optical Fiber Sensor for Bacterial Detection in Water
21/03/2024 - Conventional methods for pathogen detection in water rely on time-consuming enrichment steps followed by biochemical identification strategies, which require assay times ranging from 24 hours to a...