Advanced materials

 

Advanced materials

Improving electromigration resistance of fine?pitch redistributed layer (RDL) using graphene doped twinned copper composites
20/02/2024 - The electromigration(EM) behavior of graphene?doped twinned copper composite (GC?Cu) and nanotwinned copper (NT?Cu) redistributed layers (RDLs) were investigated. Firstly, it was found that the GC?Cu...
Liquid Metal loaded Molecular Sieve: Specialized Lithium Dendrite Blocking Filler for Polymeric Solid?state Electrolyte
20/02/2024 - All?solid?state lithium metal batteries (LMBs) are currently one of the best candidates for realizing the yearning high?energy?density batteries with high safety. However, even polyethylene oxide...
Synthesis and Insecticidal Evaluation of 3,5?Dicyanopyridines Against Cotton Aphids via Microwave?Assisted Multicomponent Reactions
21/02/2024 - Certain 2?amino?6?alkoxy?4?arylpyridine?3,5?dicyanide 1a?e were prepared via a straightforward process using microwave technology rather than conventional methods. This involved reaction of...
Effects of two antioxidants with different degrees of steric hindrance on the thermal?oxidative aging properties of ABS resin
16/02/2024 - Methodology followed in fabrication of transtibial prosthetic.AbstractLoss of a lower limb leads to immobility, necessitating the use of prosthetic foot and socket as substitutes for lost limbs....
Synthesis of FePP@MoS2@Ni?MOF composites for improving thermal and flame retardant safety properties of polyurea
19/02/2024 - Flow chart of preparation, accelerated aging, sample type and performance test of semi?conductive shielding materials for different matrix resins.AbstractThe type of matrix resin of the...
Linear sensing actuators of polypyrrole nanofiber scaffolds
21/02/2024 - Proton conducting polymer electrolyte based on chitosan?dextran?honey?NH4SCN.AbstractSolid polymer electrolytes (SPEs) play a pivotal role in advancing electrochemical devices, such as proton...
Transfer learning for inverse design of tunable graphene-based meta-surfaces
21/02/2024 - Abstract This paper outlines a new approach to designing tunable electromagnetic (EM) graphene-based meta-surfaces using convolutional neural networks (CNNs). EM meta-surfaces...
Single layered soft skin actuated with twisted and mandrel coiled actuators for soft robotics
20/02/2024 - Soft silicone?based artificial skin is essential in soft robotics because of high elongation, safe human interaction, low energy requirements and ease of manufacturing. Inspired by nature, several...
Numerical Analysis of Differential Settlement in Road Due to Widening Considering Different Reinforcement Techniques
21/02/2024 - Embankment and pavement widening of an existing road is a viable option to cope with increased traffic volume. One of the common challenges in road expansion is the occurrence of differential...
Degradation Models and Maintenance Strategies for Reinforced Concrete Structures in Coastal Environments under Climate Change: A Review
20/02/2024 - Modern engineering faces challenges in ensuring technical standards for service, durability, and sustainability. Political, administrative, and budgetary factors, coupled with climate change, pose...
Effect of 3D-Printed Porous Titanium Alloy Pore Structure on Bone Regeneration: A Review
20/02/2024 - As a biomedical material, porous titanium alloy has gained widespread recognition and application within the field of orthopedics. Its remarkable biocompatibility, bioactivity, and mechanical...
Technological Advances in Mechanical Recycling Innovations and Corresponding Impacts on the Circular Economy of Plastics
21/02/2024 - The impact of plastic pollution on the world and its inhabitants is yet to be fully measured. Significant quantities of microplastics and nanoplastics have been found in human organs, and many...
Sour Jujube (Ziziphus jujuba var. spinosa): A Bibliometric Review of Its Bioactive Profile, Health Benefits and Trends in Food and Medicine Applications
20/02/2024 - Research on the comprehensive utilization of sour jujube and its beneficial properties to human health has attracted extensive attention. This study aims to conduct a bibliometric analysis of the...
Optimizing Multi-Vessel Collision Avoidance Decision Making for Autonomous Surface Vessels: A COLREGs-Compliant Deep Reinforcement Learning Approach
22/02/2024 - Automatic collision avoidance decision making for vessels is a critical challenge in the development of autonomous ships and has become a central point of research in the maritime safety domain....
Hot Deformation Behavior of a Hot-Isostatically Pressed Ti-6Al-4V Alloy from Recycled Powder
21/02/2024 - In this work, a new use of mixed Ti-6Al-4V powder, consisting of the retained powder after screening for additive manufacturing and the recycled powder after multiple printing, has been exploited....
NiTi–Cu Bimetallic Structure Fabrication through Wire Arc Additive Manufacturing
22/02/2024 - This study endeavors to comprehensively explore and elucidate the seamless integration of NiTi shape memory alloys (SMAs) into multifaceted applications through the utilization of novel joining...
Advances in Fatigue Performance of Metal Materials with Additive Manufacturing Based on Crystal Plasticity: A Comprehensive Review
22/02/2024 - Using metal additive manufacturing processes can make up for traditional forging technologies when forming complex-shaped parts. At the same time, metal additive manufacturing has a fast forming...
Recycled Waste as Polyurethane Additives or Fillers: Mini-Review
22/02/2024 - The intensive development of the polyurethanes industry and limited resources (also due to the current geopolitical situation) of the raw materials used so far force the search for new solutions to...
Superprotonic Conductivity in a Metalloporphyrin-Based SMOF (Supramolecular Metal–Organic Framework)
21/02/2024 - Metal–organic frameworks and supramolecular metal–organic frameworks (SMOFs) exhibit great potential for a broad range of applications taking advantage of the high surface...
The Influence of Selected Fillers on the Functional Properties of Polycarbonate Dedicated to 3D Printing Applications
21/02/2024 - Additive manufacturing is still the fastest-developing technology in the modern world. Three-dimensional printing has become popular due to the method’s numerous advantages, such as its...
Sustainable Asphalt Mixtures with Enhanced Water Resistance for Flood-Prone Regions Using Recycled LDPE and Carnauba–Soybean Oil Additive
22/02/2024 - This manuscript presents a comprehensive study on the sustainable optimization of asphalt mixtures tailored for regions prone to flooding. The research addresses the challenges associated with water...