Circular Economy

 

Circular Economy

ISO 27126:2021 - Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals — Specification
01/11/2021 - This document specifies requirements for four types of thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for carrying hydrocarbons, solvents and chemicals. It specifies bore...
ISO 19220:2021 - Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Styrene copolymer blends (SAN + PVC)
01/07/2021 - This document specifies the requirements for solid-wall styrene copolymer blend (SAN + PVC) pipes and fittings for soil and waste discharge (low and high temperature) above ground inside...
F656 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings has been revised to F656-21
- Abstract This specification covers requirements for primers for use with poly(vinyl chloride) (PVC) pipe and fittings that are to be joined by PVC solvent cements. The...
D2672 Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement has been editorially changed, available as D2672-20e1
- Abstract This specification covers requirements, testing, and performance characteristics of joints for IPS PVC pipe using solvent cement. Testing requirements for both...
D8133 Standard Test Method for Determination of Low Level Phthalates in Poly(Vinyl Chloride) Plastics by Solvent Extractionâ??Gas Chromatography/Mass Spectrometry has been revised to D8133-21
- Significance and Use 5.1 Identification and Quantification of Phthalatesâ??DBP, BBP, DEHP, DNOP, DINP and DIDP are representative of the phthalates either banned or being...
D5226 Standard Practice for Dissolving Polymer Materials has been revised to D5226-21
- Significance and Use 5.1 This practice embodies the specifications to describe the preparation of a polymeric solution. 1. Scope ...
Paints and varnishes - Determination of solvents in water-thinnable coating materials - Gas-chromatographic method (ISO 22518:2019)
- This document specifies a method for the gas-chromatographic determination of the solvents in water-thinnable paints and varnishes, binder solutions, emulsions and dispersions.With the precision...
Solvents for paints and varnishes - Demineralized water for industrial applications - Specification and test methods (ISO 23321:2019)
- This document specifies the properties and requirements for demineralized water used as solvent for paints and varnishes industrial applications, e.g. production of electro-deposition coating...
Paints and varnishes - Overview of test methods on hardness and wear resistance of coatings (ISO/TR 21555:2019)
- This document provides an overview for selecting the most suitable test method regarding the evaluation of the hardness and the wear resistance of coatings.Annex A gives a summarized list of test...
D2564 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems has been revised to D2564-20
- 1. Scope 1.1 This specification covers requirements for poly(vinyl chloride) (PVC) solvent cements to be used in joining poly(vinyl chloride) piping systems. ...
D2672 Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement has been revised to D2672-20
- Abstract This specification covers requirements, testing, and performance characteristics of joints for IPS PVC pipe using solvent cement. Testing requirements for both...
D2855 Standard Practice for the Two-Step (Primer and Solvent Cement) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets has been revised to D2855-20
- Significance and Use 5.1 A solvent cement bonder/installer must follow all procedures to produce consistently strong and leak-free joints, either in shop operations or in...
F493 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings has been revised to F493-20
- Abstract This specification covers requirements for solvent cements for chlorinated poly(vinyl chloride) (CPVC) plastic pipe, tubing, and socket-type fittings. Solvent...
ISO 10352:2020 - Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area and fibre mass per unit area
01/08/2020 - This document specifies a method for the determination of the mass per unit area. It also specifies five methods (Method A to Method E) for the determination of the fibre mass per unit area of...
D8133 Standard Test Method for Determination of Low Level Phthalates in Poly(Vinyl Chloride) Plastics by Solvent Extraction#x2014;Gas Chromatography/Mass Spectrometry has been revised to D8133-20
- Significance and Use 5.1 Identification and Quantification of Phthalates—DBP, BBP, DEHP, DNOP, DINP and DIDP are representative of the phthalates either banned or...
F3203 Standard Test Method for Determination of Gel Content of Crosslinked Polyethylene (PEX) Pipes and Tubing has been revised to F3203-19
- Significance and Use 5.1 Many important properties of crosslinked ethylene plastics vary with the gel content. Hence, determination of the gel content provides a basis for...
ISO 22518:2019 - Paints and varnishes -- Determination of solvents in water-thinnable coating materials -- Gas-chromatographic method
01/07/2019 - This document specifies a method for the gas-chromatographic determination of the solvents in water-thinnable paints and varnishes, binder solutions, emulsions and dispersions.With the...
F1500 Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants has been reapproved, available as F1500-98(2019)
- Significance and Use 5.1 This test method was developed to measure non-UV-absorbing nonvolatile extractables that may be present and migrate from a microwave susceptor...
ISO 23321:2019 - Solvents for paints and varnishes -- Demineralized water for industrial applications -- Specification and test methods
01/06/2019 - This document specifies the properties and requirements for demineralized water used as solvent for paints and varnishes industrial applications, e.g. production of electro-deposition coating...
ISO 307:2019 - Plastics -- Polyamides -- Determination of viscosity number
- This document specifies a method for the determination of the viscosity number of dilute solutions of polyamides in certain specified solvents.The method is applicable to the polyamides...