Circular Economy
Circular Economy
ISO 16422-1:2024 - Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure — Part 1: General
-
This document specifies the general characteristics of solid-wall pipes made of oriented unplasticized poly(vinyl chloride) (PVC-O) for piping systems intended to be used underground or...
ISO/ASTM 52931:2023 - Additive manufacturing of metals — Environment, health and safety — General principles for use of metallic materials
-
This document provides guidance and requirements for risk assessment and implementation of prevention and protection measures relating to additive manufacturing with metallic powders.The...
F1673 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems has been editorially changed, available as F1673-10(2021)e1
-
Abstract This specification covers requirements for polyvinylidene drainage systems for corrosive applications. Requirements for material, pipe and fittings are included....
ISO 27126:2021 - Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals — Specification
01/11/2021 -
This document specifies requirements for four types of thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for carrying hydrocarbons, solvents and chemicals. It specifies bore...
F2390 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content has been revised to F2390-21
-
Abstract This specification covers the basic requirements and corresponding test methods for poly(vinyl chloride) (PVC) plastic drain, waste, and vent (DWV) pipes and...
ISO 19220:2021 - Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Styrene copolymer blends (SAN + PVC)
01/07/2021 -
This document specifies the requirements for solid-wall styrene copolymer blend (SAN + PVC) pipes and fittings for soil and waste discharge (low and high temperature) above ground inside...
F656 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings has been revised to F656-21
-
Abstract This specification covers requirements for primers for use with poly(vinyl chloride) (PVC) pipe and fittings that are to be joined by PVC solvent cements. The...
F2618 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems has been revised to F2618-21
-
1. Scope 1.1Â This specification covers the performance requirements of CPVC pipe, fittings and solvent cements used in chemical waste drainage systems. 1.2Â A...
D2672 Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement has been editorially changed, available as D2672-20e1
-
Abstract This specification covers requirements, testing, and performance characteristics of joints for IPS PVC pipe using solvent cement. Testing requirements for both...
D8133 Standard Test Method for Determination of Low Level Phthalates in Poly(Vinyl Chloride) Plastics by Solvent Extractionâ??Gas Chromatography/Mass Spectrometry has been revised to D8133-21
-
Significance and Use 5.1Â Identification and Quantification of Phthalatesâ??DBP, BBP, DEHP, DNOP, DINP and DIDP are representative of the phthalates either banned or being...
D5226 Standard Practice for Dissolving Polymer Materials has been revised to D5226-21
-
Significance and Use 5.1Â This practice embodies the specifications to describe the preparation of a polymeric solution. 1. Scope ...
D8013 Standard Guide for Establishing a Recycle Program for Roof Coverings, Roofing Membrane, and Shingle Materials has been reapproved, available as D8013-16(2021)
-
Significance and Use 4.1Â This guide is intended to be used by roof covering manufacturers to develop protocol for waste reduction and resource recovery in the field, by...
Paints and varnishes - Determination of solvents in water-thinnable coating materials - Gas-chromatographic method (ISO 22518:2019)
-
This document specifies a method for the gas-chromatographic determination of the solvents in water-thinnable paints and varnishes, binder solutions, emulsions and dispersions.With the precision...
Solvents for paints and varnishes - Demineralized water for industrial applications - Specification and test methods (ISO 23321:2019)
-
This document specifies the properties and requirements for demineralized water used as solvent for paints and varnishes industrial applications, e.g. production of electro-deposition coating...
Paints and varnishes - Overview of test methods on hardness and wear resistance of coatings (ISO/TR 21555:2019)
-
This document provides an overview for selecting the most suitable test method regarding the evaluation of the hardness and the wear resistance of coatings.Annex A gives a summarized list of test...
D2564 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems has been revised to D2564-20
-
1. Scope 1.1 This specification covers requirements for poly(vinyl chloride) (PVC) solvent cements to be used in joining poly(vinyl chloride) piping systems. ...
D2665 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings has been revised to D2665-20
-
Abstract This specification covers requirements and test methods for materials, dimensions and tolerances, pipe stiffness, crush resistance, impact resistance, hydrostatic...
D2672 Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement has been revised to D2672-20
-
Abstract This specification covers requirements, testing, and performance characteristics of joints for IPS PVC pipe using solvent cement. Testing requirements for both...
D2855 Standard Practice for the Two-Step (Primer and Solvent Cement) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets has been revised to D2855-20
-
Significance and Use 5.1 A solvent cement bonder/installer must follow all procedures to produce consistently strong and leak-free joints, either in shop operations or in...
