Materials

Materials

Thermochromic Printable And Multicolor Polymeric Composite Based on Hybrid Organic?Inorganic Perovskite
14/09/2023 - Hybrid organic?inorganic perovskites (PVKs) are among the most promising materials for optoelectronic applications thanks to their outstanding photophysical properties and easy synthesis. Herein, a...
Progress in Organic Triboluminescent EuD4TEA Crystal
17/09/2023 - Europium tetrakis dibenzoylmethide triethylammonium (EuD4TEA) crystals, the brightest TL material, exhibit promising capabilities in damage sensing within structural composites, among many other...
Prussian blue analogues derived magnetic FeCo@GC material as high-performance metallic peroxymonosulfate activators to degrade tetrabromobisphenol A over a wide pH range
18/09/2023 - Metal-organic frame (MOF) materials can effectively degrade organic pollutants, whereas the MOF is rapidly hydrolysed in water and has poor stability and low reusability. However, in the current...
Failure Prediction of Laminated Composites: Simulation of the Nonlinear Behavior and Progressive Damage
15/09/2023 - The Hashin’s criteria are useful in composite structural applications because of their simple concept and their theoretical results are relatively close to that got in the experimental parts. In...
Ferroelastic structure AlNb1/2Ta1/2O4 ceramics with improved thermophysical and mechanical properties
14/09/2023 - Effect of B site doping on structural, thermophysical, and mechanical properties of AlNbxTa1?xO4 ceramics obtained by solid?phase sintering were investigated in this work. Ferroelastic domain...
W/Si3N4 composite ceramics reinforced with core?shell W?crystallized oxynitride phase
14/09/2023 - The introduction of a reinforced phase is an effective way to toughen silicon nitride ceramics. However, the residual stress caused by thermal expansion mismatch between the reinforced phase and...
3D printed polylactide based zirconia toughened alumina composites: fabrication, mechanical and in vitro evaluation
14/09/2023 - Fused deposition modeling (FDM) has been a commonly used technique in the fabrication of geometrically complex biodegradable scaffolds for bone tissue engineering. Generally, either individual...
Interfacial H-bonding enabled liquid metal integrated multifunctional elastomeric architectures
15/09/2023 - Abstract Currently, liquid metal (LM)-based multifunctional soft composites are an emerging class of materials with transformative potential towards flexible electronics, soft...
Exploring the electrochemical potential of redox-active mixed metal sulfide as an efficient electrode material for supercapacitor-battery hybrid
14/09/2023 - Abstract Hybrid supercapacitors have gained upsurge interest in the energy storage application, but still have room to improve their specific power and energy limits with the...
Effect of complex of resorcinol and hexamethylenetetramine modified halloysite nanotubes (RH-HNTs) on the mechanical and swelling characteristics of NR/EPDM nanocomposites
18/09/2023 - Abstract Using a two-roll mixing mill and the vulcanization process, complex of resorcinol and hexamethylenetetramine modified halloysite nanotubes (RH-HNTs) natural...
Quantitatively evaluation of the hydrogen bonding effects on the thermal properties of poly(vinyl alcohol)/tea polyphenols composites
15/09/2023 - Abstract The effects of the hydrogen, H, bonding on the thermal properties of poly(vinyl alcohol), PVA,/tea polyphenols, TP, composites have been quantitatively evaluate....
Carbon nanotube-reinforced epoxy composites in seawater: effect of amino-functionalization and post-curing process?
16/09/2023 - Abstract Due to their extraordinary properties, functionalized carbon nanotubes (CNTs) have been added to epoxy matrices. In the marine industry, CNT/epoxy composite is applied...
Aerospace, Vol. 10, Pages 818: Using the Impulse Method to Determine High-Pressure Dynamic Burning Rate of Solid Propellants
18/09/2023 - A new method for determining the burning rate of a solid propellant, called the Impulse Method, is proposed in this paper. It is based on the proportional relationship between the impulse generated...
Experimental Study on the Cleaning Performance of Hot Air Flow Cleaning Device
18/09/2023 - When processing wet rice, the efficiency of the combine harvester diminishes due to the heightened surface water content of the paddy. To address this, a hot air flow cleaning apparatus was...
Precision and Dimensional Stability of Bonded Joints of Carbon-Fibre-Reinforced Polymers Parts
18/09/2023 - This article aims to investigate the accuracy and dimensional stability of bonded metal and CFRP (Carbon Fibre Reinforced Plastic) adherends. The motivation behind this study was to assess the...
Application of Hyperpure Chlorine Dioxide for Regenerative Endodontic Treatment of a Root-Canal-Treated Immature Tooth with External Cervical Resorption and Periapical Lesion: A Case Report
17/09/2023 - The consequences of traumatic injuries are pulp necrosis, periapical inflammation, and possible external cervical resorption (ECR). The concomitant cessation of root maturation and dentinogenesis in...
Full-Scale Model Test of Subway Contact Channel under Mechanical Construction
16/09/2023 - The mechanical construction method for a subway contact channel has the advantages of a short construction period and high safety, and is more and more being applied in coastal soft-soil areas. In...
Effect of Fireproof Coatings on the Post-Fire Behavior of CFRP Composite Sheets
16/09/2023 - This study examines the effect of two self-developed novel fireproof coatings on the fire resistance of carbon fiber-reinforced polymer (CFRP) composite sheets. The post-fire flexural properties were...
A Moment-Fitted Extended Spectral Cell Method for Structural Health Monitoring Applications
16/09/2023 - The spectral cell method has been shown as an efficient tool for performing dynamic analyses over complex domains. Its good performance can be attributed to the combination of the spectral element...
Optimized Computational Intelligence Model for Estimating the Flexural Behavior of Composite Shear Walls
16/09/2023 - This article presents a novel approach to estimate the flexural capacity of reinforced concrete-filled composite plate shear walls using an optimized computational intelligence model. The proposed...
Prediction of Flexural Strength of RC Circular Columns Considering Lateral Confinement Effects of FRCM and Transverse Steel Reinforcement
16/09/2023 - There has recently been growing interest in making a sustainable and durable fiber reinforced cementitious matrix (FRCM) to improve the seismic performance of RC column members. However, most studies...