Materials

 

Materials

Water?based Polyurethane Heating Film with Double?Layer Conductive Network for a Rapid Electrothermal Response
21/05/2024 - Carbon?based composite materials have garnered widespread attention in the field of Personal Thermal Management (PTM). In these applications, constructing conductive fillers with a highly...
The Critical Analysis of Membranes Towards Sustainable and Efficient Vanadium Redox Flow Batteries
22/05/2024 - Vanadium redox flow batteries (VRFB) are a promising technology for large?scale storage of electrical energy, combining safety, high capacity, ease of scalability, and prolonged durability; features...
Toward Multiscale, Multimaterial 3D Printing
22/05/2024 - Biological materials and organisms possess the fundamental ability to self?organize, through which different components are assembled from the molecular level up to hierarchical structures with...
The Properties of Tannery Waste Addition as a Filler Based on Two Types of Polymer Matrices: Poly(Butylene Adipate?Co?Terephthalate) (PBAT) and Poly(Butylene Succinate) (PBS)
26/05/2023 - Wet blue leather is a waste produced by the leather industry. It is a difficult waste product to dispose of, and if not disposed of properly, it will affect the environment and cause toxicity....
Influence of Drilling Parameters on the Delamination and Surface Roughness of Insulative?Coated Glass/Carbon?Hybrid Composite
02/06/2023 - Drilling in synthetic fiber?reinforced polymer composites is facing challenges due to their anisotropic, inhomogeneity, and abrasive machining behavior. The joining of composite parts using fasteners...
Synthesis, Evaluation, and Electrochemical Detection Application of Magnetic Molecularly Imprinted Polymers for 4,4??Methylenedianiline from Food?Contact Materials
13/06/2023 - Magnetic molecularly imprinted polymers (MIPs) capable of selectively recognizing and absorbing 4,4??methylenedianiline (MDA) were successfully synthesized, using Fe3O4 coated with mesoporous silicon...
Fabrication and Mechanical Properties of Chitosan/FHA Scaffolds
04/07/2023 - Fluor?hydroxyapatite (FHA) is a biomaterial with dental and orthopedic potential that is highly regarded as a result of bioactivity and high biocompatibility. Chitosan is used as a growth promoting...
Biodegradable Composite of Gelatin Blend Microcrystalline Cellulose for Cd2+, Pb2+, and Cr3+ Adsorption from an Aqueous Solution
29/06/2023 - Biodegradable and eco?friendly composite adsorbent was synthesized from modified jute fiber and gelatin and evaluated its efficacy in removing cadmium (Cd2+), lead (Pb2+), and chromium (Cr3+) ions...
Mechanical Interlocking Approaches to the Prediction of Mechanical and Tribological Behavior of Natural Fiber?Reinforced Polymer Hybrid Nanocomposites or Automotive Applications
02/08/2023 - Polymer matrix composites synthesized with biodegradable natural fiber obtain a predominant structure with specific properties at a low?processing cost. The unique characteristics of polymer matrix...
A Comprehensive Review of Ultrahigh Molecular Weight Polyethylene Fibers for Applications Based on Their Different Preparation Techniques
19/09/2023 - Ultrahigh molecular weight polyethylene (UHMWPE) fiber is widely recognized for its exceptional properties, including high strength?to?weight ratio, toughness, and chemical resistance, making it a...
Fabrication of Graphene Oxide Reinforced Biocomposite: Recycling of Postconsumed Footwear Leather
28/09/2023 - The increasing concerns about solid waste disposal have led to the development of innovative strategies for repurposing waste materials. This paper describes a simple solution casting process for...
Polylactic Acid?Based Film Modified with Nano?Ag?Graphene?TiO2: New Film versus Recycled Film
25/11/2023 - The increase in the polymer?based materials needs has induced along the waste accumulation, thus argued higher interest in recycling. The study aims to assess the structural, morphological,...
Influences of Nanosilica Particles on Density, Mechanical, and Tribological Properties of Sisal/Hemp Hybrid Nanocomposite
15/05/2023 - Focusing on natural fibers are the prominent substitution for synthetic fiber and reinforced into polymer matrices found unique properties such as lightweight, cost?effectiveness, and good mechanical...
Utilization of Plastic Waste for Developing Composite Bricks and Enhancing Mechanical Properties: A Review on Challenges and Opportunities
02/05/2023 - The population increases demand for plastic in every sector along with single?use plastic rapidly increasing, but it still has a low recycling rate. The use of plastic in the form of brick is...
Nontraditional Natural Filler?Based Biocomposites for Sustainable Structures
02/05/2023 - In recent years, there has been a growing awareness and demand for global sustainability, as well as a mandate for the use of renewable and environmentally sustainable materials and processes. Due to...
A Decision?Making Carbon Reinforced Material Selection Model for Composite Polymers in Pipeline Applications
11/04/2023 - Pipes are manufactured primarily through the extrusion process. One of the material extrusion processes in recent digital manufacturing is additive manufacturing’s fusion deposition modeling. Pipes...
Preparation and Properties of Boron Nitride or Aluminum Nitride Reinforced Glass Fiber/Modified Polyphenylene Sulfide Composites
11/04/2023 - In this work, polyphenylene sulfide (PPS) containing carboxyl group was synthesized and used to prepare PPS?2COOH/LGF/AlN and composites with high?temperature resistance, corrosion resistance, low...
Studying the Fabrication and Characterization of Polymer Composites Reinforced with Waste Eggshell Powder
29/03/2023 - Polymeric and plastic materials currently have numerous positive impacts due to their unique properties that make them important for various engineering applications. However, sustainability is a...
Low Temperature, In Situ Polymerization of Vinyl Acetate in Silica Containing Emulsion Gels
28/01/2023 - Vinyl acetate (VAc) was polymerized to about 90% conversion in 9?h at 40°C from the colloidal microstructure of the VAc/fumed silica/cetyltrimethylammonium bromide (CTAB) system. The glass...
Removal of Dye from Wastewater Using a Novel Composite Film Incorporating Nanocellulose
20/01/2023 - Research shows that the composite material is used as an adsorbent to remove pollutants from wastewater. This work is aimed at producing a novel composite film comprising chitosan, polyvinyl alcohol,...
Epoxy?Based Carbon Fiber?Reinforced Plastics Recycling via Solvolysis with Non?Oxidizing Methanesulfonic Acid
22/05/2024 - The production of epoxy resin samples with proprietary composition is described. Recycling composites were formed by vacuum?infusing resin into a fabric, followed by curing. Recycling involved...