Materials
Materials
Correction to “Fatigue Crack Characteristics in Gradient Predeformed Pearlitic Steel under Multiaxial Loading”
21/11/2024 -
The incorporation of maleic anhydride‐grafted styrene‐ethylene‐butene‐styrene copolymer (SEBS‐g‐MAH) leads to the formation of core‐shell structure particles within the...
Construction of Core?Shell Structure in PA6/ABS/SEBS Blends for Achieving Stiffness?Toughness Balance
20/11/2024 -
The incorporation of maleic anhydride?grafted styrene?ethylene?butene?styrene copolymer (SEBS?g?MAH) leads to the formation of core?shell structure particles within the...
High moisture permeable cellulose diacetate films by reactive polyethylene glycol plasticizers
21/11/2024 -
Abstract Intrinsic moisture permeability of bio-based polymer cellulose diacetate (CDA) is not sufficient for some requirements. Herein, isophorone diisocyanate (IPDI) modified...
Expanded Polystyrene/Tyre Crumbs Composites as Promising Aggregates in Mortar and Concrete
19/11/2024 -
A composite material comprising expanded polystyrene (EPS), granulated tyre rubber (GTR), and a compatibilizer is demonstrated as a possible replacement for fine and coarse agglomerates in mortar and...
Sugarcane-Based Polyethylene Biocomposite Reinforced with Organophilic Montmorillonite Clay: Experimental Characterization and Performance Evaluation
20/11/2024 -
With the growing human awareness of trying to reduce the environmental impact in today’s world, the development of new sustainably based materials has been the increasing focus of...
Effect of polyacrylic acid?polypropylene?polyacrylic acid triblock copolymers with different acid content on mechanical properties of carbon fiber/polypropylene composites
19/11/2024 -
Effect of polyacrylic acid?polypropylene?polyacrylic acid triblock copolymers (iPP?PAA) on mechanical properties and interfacial shear strength.The use of polyacrylic acid?polypropylene?polyacrylic...
Compatibilization of Post?Consumer Recycled Polypropylene/Polyethylene Binary Blends
13/11/2024 -
ABSTRACTThis work investigates the compatibilization of post?consumer recycled binary blends of polypropylene/polyethylene (PP/PE), with either high?density PE (HDPE) or linear low?density PE...
Repurposing ABS to Produce Polyamide 6 (PA6)-Based Blends: Reactive Compatibilization with SAN-g-MA of a High Degree of Functionalization
05/11/2024 -
In this study, recycled acrylonitrile-butadiene-styrene terpolymer (ABSr) was reused to produce polyamide 6 (PA6)-based blends. This was achieved through reactive compatibilization using...
Super Tough PA6/PP/ABS/SEBS Blends Compatibilized by a Combination of Multi-Phase Compatibilizers
02/11/2024 -
Development of multi-component blends to prepare high-performance polymer materials is still challenging, and is a key technology for mechanical recycling of waste plastics. However, a multi-phase...
Characterization of Mixtures Based on High-Density Polyethylene and Plasticized Starch
30/10/2024 -
This paper presents the obtaining and characterization of blends based on high-density polyethylene (HDPE) and plasticized starch. In addition to plasticized starch (28.8% w/w), the compositions made...
Polyurethane nanocomposites from 4?bromo?1H?pyrazole?blocked?diisocyanates
18/10/2024 -
Process of blends of curaua hemicellulose and PLA, utilizing citric acid as a compatibilizer, highlights enhanced mechanical properties and crystallinity.AbstractThe development of new biopolymers...
The conformational statistics of amphiphilic polymers with distinct topological structures at the interface between two phases
24/10/2024 -
The study examines the dimensional changes of compatibilizer copolymers with varying topological structures at the interface of a binary blend system. It delineates the scaling exponent between the...
Tailoring the Mechanical Properties and Foaming Behaviors of PLA/P4HB Blends by Using P4HB?g?GMA as Compatibilizer
23/10/2024 -
ABSTRACTSynthetic poly(4?hydroxybutyrate) (P4HB), a flexible and biodegradable polymer, shows great promise in improving the toughness of poly(lactic acid) (PLA), but the inherent immiscibility of...
Effect of PHBV?g?MA compatibilizer on the properties of poly(3?hydroxybutyrate?co?3?hydroxyvalerate)/polylactide blend/Diss fibers biocomposites
15/10/2024 -
This study investigates the morphology and properties of biocomposites based on a blend of poly(3?hydroxybutyrate?co?3?hydroxyvalerate) (PHBV) and poly (lactic acid) (PLA) 50/50 (w/w) reinforced with...
Biodegradable composites from poly(butylene adipate?co?terephthalate) with soybean protein isolate: Preparation, characterization, and performances
30/09/2024 -
SPI/PBAT composite interface structure.Soy protein isolate (SPI), a widely available and inexpensive natural polymer, can be used as a filler to reduce the cost of poly(butylene...
A 3D hydrogel scaffold with adjustable interlayer spacing for the formation of compact myocardial tissue
25/09/2024 -
A new strategy for upcycling waste ABS has been developed, which improves strength and partially compensates for degradation?related mechanical losses. Moreover, the functionalized waste ABS acts as...
Cavitation behavior of poly(4?methyl?1?pentene)/polypropylene/poly(4?methyl?1?pentene) tri?layer film: Influence of annealing and stretching temperature
14/08/2024 -
POE/POE?g?PHEMA/EuFT light conversion film for photovoltaic modules was prepared by using EuFT as the LDS specie, and POE?g?PHEMA as the compatibilizer. The obtained film can convert the UV light to...
Fabrication of Graphene Oxide Reinforced Biocomposite: Recycling of Postconsumed Footwear Leather
28/09/2023 -
The increasing concerns about solid waste disposal have led to the development of innovative strategies for repurposing waste materials. This paper describes a simple solution casting process for...
Fused Deposition Modeling of Single?Use Plastic Alloy
14/02/2023 -
Packaging plastics are called ‘single?use plastics’ because of short lifetime. Among which, the three plastics of polyethylene (PE), polypropylene (PP), and polyethylene terephthalate (PET) take...
Anti?fouling capacity enhancement of thin?film composite polyamide membrane by chitosan graft polymerization methods
04/05/2024 -
Enhancing the mechanical and foaming properties of PBAT/P4HB blends through the addition of P4HB?g?GMA compatibilizer.AbstractPoly(butylene?adipate?co?terephthalate) (PBAT) is recognized for its...
Development of binary and ternary polyester shape memory blends for additive manufacturing
26/04/2024 -
Abstract The goal of this work was to create shape memory polymer blends for the additive manufacturing technology of fused filament fabrication. An iterative approach was taken...
