Materials
Materials
3D Printing of Aluminum Alloys by Vat Photopolymerization Using Radical Inhibitors
10/04/2025 -
This study demonstrates enhanced photopolymerization stability of AA5052 slurry through tert‐butylhydroquinone inhibitor incorporation. Utilizing DLP‐based 3D printing, high‐resolution green...
Preparation of Ti6Al4V Slurry for Digital Light Processing 3D Printing
09/12/2024 -
Herein, the effects of slurry composition on the rheological properties and curing properties of metal slurries are studied. In addition, the dispersion mechanism of the dispersant is analyzed. At an...
Influence of ZrB2 Nanoparticles on Microstructure and Mechanical Properties of Ni-Co Coating
11/11/2024 -
To improve the service life of continuous casting crystallizer, the NiCo-ZrB2 coating was prepared using nanocomposite plating technology. Uniformly dispersed nano-ZrB2 particles significantly...
Construction of a hydrophobicity, phosphorus? and nitrogen?containing layered double hydroxides?based synergistic effect flame retardant for poly (lactic acid)
10/10/2024 -
Schematic diagram of the dispersion stabilization mechanism of different PDA?PEA dispersants on graphene.AbstractGraphene, with excellent thermal conductivity, electrical and corrosion shielding...
Synthesis and Characterization of Poly(1,3-dioxolane) Using Green Catalyst. Application as Superplasticizer or Dispersant in Cement Paste
10/10/2024 -
Abstract 1,3-Dioxolane polymer (PDXL) was synthesized using Halloysite, a natural clay material, as solid acid catalyst for cationic ring-opening polymerization. This catalyst...
The Effect of Sodium Hexametaphosphate on the Dispersion and Polishing Performance of Lanthanum–Cerium-Based Slurry
06/10/2024 -
A lanthanum–cerium-based abrasive composed of CeO2, LaOF, and LaF3 was commercially obtained. The effect of sodium hexametaphosphate (SHMP) on powder dispersion behavior was...
The Effect of Carbon Nanotubes and Carbon Microfibers on the Piezoresistive and Mechanical Properties of Mortar
31/07/2024 -
Sustainability, safety and service life expansion in the construction sector have gained a lot of scientific and technological interest during the last few decades. In this direction, the synthesis...
Preparation and optimization of silicon nitride slurries for digital light processing
18/08/2024 -
Digital light processing (DLP) three?dimensional printing has the advantages of both high printing resolution and efficiency and has been used to manufacture high?precision, small, and complex shaped...
Assessing porosity limit in freeze?cast sintered lithium titanate (Li4Ti5O12) materials
08/08/2024 -
Sucrose?based compositions exhibited the characteristic freeze?cast microstructure over the entire solid loading range, whereas sucrose?CTAB?based compositions exhibited cellular pore morphology. As...
Covalently attached phosphonic acid?Si2O3?PEO polymer membranes for PEMFC applications
15/07/2024 -
Development of composite films.AbstractCyrene is a new biodegradable solvent, which represents a green alternative to many traditional toxic solvents for advanced polymers. Therefore, this...
High stability, high solid content, low viscosity titanium dioxide dispersion
13/05/2024 -
AbstractAchieving stable dispersion of titanium dioxide (TiO2) particles is crucial for their practical applications in various fields. However, stabilizing pigment TiO2 (200–300 nm) in aqueous...
Study on the Effect of Additives on the Performance of Cement-Based Composite Anti-Corrosion Coatings for Steel Bars in Prefabricated Construction
25/04/2024 -
The influence of polymer emulsion, pigment filler, and dispersant on the corrosion resistance of polymer cement-based composite anti-corrosion coatings were investigated in this study. Adhesion loss...
Synthesis of Nano-Structured Conjugated Polymers with Multiple Micro-/Meso-Pores by the Post-Crosslinking of End-Functionalized Hyperbranched Conjugated Polymers
24/04/2024 -
A nano-structured conjugated polymer with multiple micro-/meso-pores was synthesized by post-crosslinking of an end-functionalized hyperbranched conjugated prepolymer. Firstly, an AB2 monomer...
Influence of citric acid and EFKA as dispersants on the properties of alumina monoliths produced by tert-butyl alcohol-based freeze-casting
16/04/2024 -
Abstract In this paper, EFKA FA 4663 (EFKA) dispersant was used for the first time in the alumina slurries tert-butyl alcohol-based freeze-casting and compared to the...
Preparation of Copper-Doped Zinc Oxide (CZO) Nanoparticles and CZO/Acrylic Copolymer Emulsion with Polyvinylpyrrolidone (PVP) Coated on Glass Substrate for Optical Properties
18/04/2024 -
This study investigated the effect of copper (Cu) doping content on zinc oxide with varied weight percentages and the dispersion of Cu-doped ZnO (CZO) by adding polyvinylpyrrolidone (PVP), coated on...
Sustainable polyurethane for the remediation of oil spills: a review
04/04/2024 -
Catastrophic oil spill is one of the major issues to the environment. Various methods have been used to treat oil spillage including in situ burning, the use of skimmers, dispersants,...
Waste Cooking Oil as Eco-Friendly Rejuvenator for Reclaimed Asphalt Pavement
24/03/2024 -
Over 50 MioT of Waste Cooking Oil (WCO) was collected worldwide in 2020 from domestic and industrial activities, constituting a potential hazard for both water and land environments, and requiring...
Characterization of Ceria Nanoparticles as Abrasives Applied with Defoaming Polymers for CMP (Chemical Mechanical Polishing) Applications
19/03/2024 -
Chemical mechanical polishing/planarization (CMP) is an essential manufacturing process in semiconductor technologies. This method combines chemical and mechanical forces to smooth the surfaces of...
Property Enhancement of Waste Printed Circuit Boards Powders Reinforced Polypropylene by In Situ Magnesium Hydroxide Impregnation from Waste Lye
15/03/2024 -
Using alkali pretreatment can effectively remove residual variable-valence metals from non-metallic powder (WPCBP) in waste printed circuit boards. However, substantial amounts of waste lye are...
Dynamics of Tribofilm Formation in Boundary Lubrication Investigated Using In Situ Measurements of the Friction Force and Contact Voltage
14/03/2024 -
The complex dynamics of tribofilm formation on boundary-lubricated steel surfaces were investigated in real time by combining in situ measurements of the temporal variation of the coefficient of...
