Materials
Materials
Removal of Ampicillin with Nitrifying Cultures in a SBR Reactor
-
Abstract The presence of antibiotics in wastewater discharges significantly affects the environment, mainly due to the generation of bacterial populations with multiple antibiotic...
HClO‐Activated Near‐Infrared Chemiluminescent Probes with a Malononitrile Group for In‐Vivo Imaging
23/12/2024 -
Eight chemiluminescence (CL) probes with a malononitrile group are easily synthesized by introducing donors to regulate HClO‐activated CL emissions from 600 to 750 nm, with comprehensive...
Livelihood vulnerability assessment among the agrarian indigenous communities of Sundarban Biosphere Reserve in India for building resilience and adaptation
21/11/2024 -
Indian Sundarban Biosphere Reserve (ISBR) is a vulnerable Southeast Asian region. The negative effects of climate change were putting tremendous pressure on this region. However, a dearth of...
New Advances on the Dispersive and Polar Surface Properties of Poly(styrene-co-butadiene) Using Inverse Gas Chromatography
21/11/2024 -
The dispersive and polar properties of materials, and especially of polymers and copolymers, play an important role in several engineering applications implying their surfaces and interfaces. The...
Exploring the Mechanical and Thermal Impact of Natural Fillers on Thermoplastic Polyurethane and Styrene–Butadiene Rubber Footwear Sole Materials
18/11/2024 -
The increasing concern for sustainability in the footwear industry has spurred the exploration of eco-friendly alternatives for materials commonly used in sole manufacturing. This study examined the...
Experimental Evaluation of Under Slab Mats (USMs) Made from End-of-Life Tires for Ballastless Tram Track Applications
04/11/2024 -
The growing population of urban areas results in the need to deal with the noise pollution from the transportation system. This study presents experimental test results of static and dynamic elastic...
Removal of Organic Micropollutants and Microplastics via Ozonation Followed by Granular Activated Carbon Filtration
31/10/2024 -
Discharge from Wastewater Treatment Plants (WWTPs) can result in the emission of organic micropollutants (OMPs) and microplastics (MPs) into the aquatic environment. To prevent this harmful release,...
Thermomechanical properties and microstructure of concrete made with recycled concrete aggregates after exposure to high temperatures
14/10/2024 -
Using recycled concrete aggregates (RCA) in concrete has emerged as a promising solution to produce concrete with reduced environmental impact and adequate performance. However, a deeper...
Improved mechanical performance and swelling resistance of ethylene propylene diene monomer/styrene butadiene rubber nanocomposites through the incorporation of graphene oxide as a reinforcing filler
15/10/2024 -
Abstract Graphene oxide (GO) was produced by exfoliating natural flake graphite using Hummers’ method. Using the ionic liquid 1-allyl-3-methyl-imidazolium chloride (AMICl),...
Application of Decentralized Wastewater Treatment Technology in Rural Domestic Wastewater Treatment
05/10/2024 -
The management of domestic wastewater in rural areas has always been challenging due to characteristics such as the wide distribution and dispersion of rural households. There are numerous domestic...
Rheological Properties and Performance Evaluation of Different Types of Composite-Modified Asphalt in Cold Regions
13/09/2024 -
In low-temperature environments, asphalt materials harden easily and become brittle, and the repeated action of traffic load further aggravates the cracking of and damage to the asphalt mixture. In...
Study on the Microscopic Mechanism and Performance of TPU/SBR Composite-Modified Asphalt
30/09/2024 -
To enhance the service life of traditional asphalt pavement and mitigate issues such as high-temperature rutting and low-temperature cracking, this study investigates the composite modification of...
Application of Experimental Design for Optimization of Interfacial Adhesion between Rubber and Surface Modified Polyester Fabric-Factory Experience
12/08/2024 -
Tires and conveyor belts are among the most prominent examples of cord-rubber composites in which, synthetic fibers are extensively used as reinforcing material. Although, it passes a long time...
Winery wastewater treatment by microalgae Chlorella sorokiniana and characterization of the produced biomass for value-added products
26/07/2024 -
The microalgae Chlorella sorokiniana was used for the treatment of winery wastewater (WWW). Batch experiments were initially conducted to investigate how biomass acclimatization in different...
Influence of Supercritical Carbon Dioxide-Assisted Polyamide Acid Modification of Aramid Fibers on the Properties of Aramid Fiber-Reinforced Styrene Butadiene Rubber
22/05/2024 -
Modified aramid fibers (AFs) were prepared through grafting modification of polyamide acid (PAA) assisted by supercritical carbon dioxide (scCO2). The scCO2-assisted diffusion, penetration, and...
Evaluation of composites based on virgin rubber/devulcanized rubber reinforced with chemically and radiation activated polyurethane scrap for possible applications
13/04/2024 -
Utilization of virgin rubber/devulcanized rubber composite reinforced with activated polyurethane scrap for flexible tiles application.Reusing industrial waste is one of the new tactics being used to...
Physiological and Microbial Community Analysis During Municipal Organic Waste Leachate Treatment by a Sequential Nitrification-Denitrification Process
-
The decomposition of municipal organic waste (MOW) results in the generation of gasses and liquid fractions called leachates that may contain high concentrations of organic matter and ammonium...
Influence of Aeration Rate on Uncoupled Fed Mixed Microbial Cultures for Polyhydroxybutyrate Production
02/04/2024 -
The use of residual streams as feedstock for the production of polyhydroxyalkanoates (PHAs) is growing steadily, as it allows the valorization of waste and nutrients otherwise disposed of and the...
Operating Properties of Deep Hole Boring Tools with Modified Design
28/03/2024 -
This paper presents the results of research work on the revised design of a deep hole boring tool. The study was divided into three stages: theoretical, experimental and operational. In the...
Research on Performance Improvement of Emulsified Asphalt Mixture Based on Innovative Forming Process
21/03/2024 -
Bulk density and porosity have great influence on the technical performance of an emulsified asphalt mixture, so in order to enhance the strength of the asphalt mixture, bulk density should be...
New role of ionic liquid as accelerator activator in rubber compounds and its influence on curing and mechanical properties
18/03/2024 -
Interaction of Ionic liquid in rubber compounds in presence of activator and accelerator.This study focuses on the effect of ionic liquids (ILs) on the cure characteristics and filler dispersion of...
