Injection

 

Injection

Mechanical, Thermal, Morphological, and Fibre Characteristics During Injection Moulding of Green Composites
03/12/2023 - The current work demonstrates the mechanical, thermal, and morphological characteristics of green composites processed by injection moulding. Bamboo fibre (BF) was chemically treated with 2%...
Eliminating the thermal degradation of polylactic acid by the modification of a macromolecular epoxy?type chain extender
01/12/2023 - Native potato starch was used as a filler for PLA. The composites were subjected to artificial weathering as well as different storages to investigate the resistance. Humidity and water leads to...
Effect of interfacial modification on functional properties of polyethylene and polypropylene—Fibrous silica nanocomposites
01/12/2023 - The investigation on effect of the incorporating of dendritic fibrous materials on the thermal, morphological, mechanical, rheological and electrical properties of thermoplastic composites.This paper...
Preparation and Performance Evaluation of Amphiphilic Polymers for Enhanced Heavy Oil Recovery
02/12/2023 - The continuous growth in global energy and chemical raw material demand has drawn significant attention to the development of heavy oil resources. A primary challenge in heavy oil extraction lies in...
A Comparative Study on Crystallisation for Virgin and Recycled Polyethylene Terephthalate (PET): Multiscale Effects on Physico-Mechanical Properties
04/12/2023 - Poly(Ethylene Terephthalate) (PET) is one of the most used polymers for packaging applications. Modifications induced by service conditions and the means to make this matter circular have to be...
Optimization Method for Water-Flooded Beach-Bar Sand Bodies: A Case Study of the Fourth Member Red Beds of the Paleogene Shahejie Formation in the Dongying Depression
03/12/2023 - As water flooding continues to advance in mature oil fields, conventional well logging curve responses exhibit anomalies, particularly in deep-seated beach-bar thin-layer sand bodies. These sand...
Plastic Product Decorating Summit Exceeds Expectations
05/12/2023 - By Jeff Peterson, editor-in-chief, Plastics...
A Novel Composite Voltammetric Sensor Based on Yttria-Stabilized Zirconia Doped with Neodymium-Carbon Black-Nafion Glassy Carbon Electrode for Metoprolol Determination
- For the first time, a new composite voltammetric sensor based on yttria-stabilized zirconia doped with neodymium-carbon black-Nafion glassy carbon electrode (YSZNd-CB-Nafion/GCE) for the...
A Study on the Architecture of Artificial Neural Network Considering Injection-Molding Process Steps
30/11/2023 - In this study, an artificial neural network (ANN) was established to predict product properties (mass, diameter, height) using six process conditions of the injection-molding process (melt...
Modeling Microscale Foam Propagation in a Heterogeneous Grain-Based Pore Network with the Pore-Filling Event Network Method
29/11/2023 - Foam flooding is an efficient and promising technology of enhanced oil recovery that significantly improves sweep efficiency of immiscible displacement processes by providing favorable mobility...
Universal Free-Fall Law for Liquid Jets under Fully Developed Injection Conditions
- We show that vertical slender jets of liquid injected in air with a fully developed outlet velocity profile have a universal shape in the common case in which the viscous force is much smaller than...
Electron Slingshot Acceleration in Relativistic Preturbulent Shocks Explored via Emitted Photon Polarization
- Transient electron dynamics near the interface of counterstreaming plasmas at the onset of a relativistic collisionless shock (RCS) is investigated using particle-in-cell simulations. We identify a...
Development of polyamide 6?graphene oxide nanocomposite and direct?joining with aluminum alloy for lightweight engineering applications
28/11/2023 - Development of polyamide 6?graphene oxide nanocomposite and direct?joining with aluminum alloy.Lightweight polyamide composites and structures have been widely studied and employed in several...
Thermal Performance Analysis of Windows, Based on Argon Gas Percentages between Window Glasses
24/11/2023 - Windows in new buildings in Korea are equipped with double or triple glazing, a low-E coating, and gas injection between the panes of glass, in accordance with the regulations for the reinforced...
Improvement of the Ductility of Environmentally Friendly Poly(lactide) Composites with Posidonia oceanica Wastes Plasticized with an Ester of Cinnamic Acid
25/11/2023 - New composite materials were developed with poly(lactide) (PLA) and Posidonia oceanica fibers through reactive extrusion in the presence of dicumyl peroxide (DCP) and subsequent injection molding....
Characterization of the Polyetheretherketone Weldment Fabricated via Rotary Friction Welding
27/11/2023 - Polyether ether ketone (PEEK) is frequently employed in biomedical engineering due to its biocompatibility. Traditionally, PEEK manufacturing methods involve injection molding, compression molding,...
Analysis of Factors Impacting CO2 Assisted Gravity Drainage in Oil Reservoirs with Bottom Water
24/11/2023 - In recent years, there has been significant focus on the issue of global carbon emissions. One of the most prominent areas of research in this regard is the use of carbon capture, utilization, and...
Flow Potential Analysis-Based Gas Channeling Control for Enhanced Artificial Gas Cap Drive in Fractured-Vuggy Reservoirs
26/11/2023 - Fractured-vuggy reservoirs are known for containing substantial amounts of oil in high positions of reservoir, even after natural energy development and water injection development. However, due to...
Insulin–Dendrimer Nanocomplex for Multi?Day Glucose?Responsive Therapy in Mice and Swine
22/11/2023 - The management of diabetes in a manner offering autonomous insulin therapy responsive to glucose?directed need, and moreover with a dosing schedule amenable to facile administration, remains an...
Colorless, transparent, and shape memory polyurethane networks with high strength and recyclability
22/11/2023 - Polymers bearing leachable and non?leachable antimicrobial agents.AbstractReported herein is the fabrication of antimicrobial polypropylene (PP) surfaces with nonleachable magnesium hydroxide...