Transport
Transport
Aerospace, Vol. 11, Pages 344: DBO-CNN-BiLSTM: Dung Beetle Optimization Algorithm-Based Thrust Estimation for Micro-Aero Engine
26/04/2024 -
Thrust constitutes a pivotal performance parameter for aircraft engines. Thrust, being an indispensable parameter in control systems, has garnered significant attention, prompting numerous scholars...
Aerospace, Vol. 11, Pages 346: Damage Effects and Mechanisms of High-Power Microwaves on Double Heterojunction GaN HEMT
26/04/2024 -
In this paper, simulation modeling was carried out using Sentaurus Technology Computer-Aided Design. Two types of high electron mobility transistors (HEMT), an AlGaN/GaN/AlGaN double heterojunction...
Aerospace, Vol. 11, Pages 352: Numerical Simulation of Water Film Flow and Breakup on Anti-Icing Surface
29/04/2024 -
The flow and morphological characteristics of liquid water on the icing and anti-icing surfaces of aircraft are closely related to the icing characteristics and anti-icing surface temperature...
Aerospace, Vol. 11, Pages 357: Influence of Rotor Inflow, Tip Loss, and Aerodynamics Modeling on the Maximum Thrust Computation in Hover
29/04/2024 -
Comprehensive rotorcraft simulation codes are the workhorses for designing and simulating helicopters and their rotors under steady and unsteady operating conditions. These codes are also used to...
Design and Analysis of a Curved Composite Bracket
27/04/2024 -
The structural design of a composite bracket applied to an aircraft propulsion system was carried out in this study. Aircraft engine intakes are fitted with various components in order for the engine...
A New Double-Step Process of Shortening Fibers without Change in Molding Equipment Followed by Electron Beam to Strengthen Short Glass Fiber Reinforced Polyester BMC
26/04/2024 -
It is vital to maximize the safety of outdoor constructions, airplanes, and space vehicles by protecting against the impact of airborne debris from increasing winds due to climate change, or from...
Composite Nanomaterials Based on Polymethylmethacrylate Doped with Carbon Nanotubes and Nanoparticles: A Review
29/04/2024 -
Composite polymer materials have high strength and lightness, which makes them attractive for use in a variety of structures and products. The present article contains an overview of modern works...
Flight safety assessment based on a modified human error risk quantification approach
29/04/2024 -
Abstract
Aerospace, Vol. 11, Pages 323: A Resilient Approach to a Test Rig Setup in the Qualification of a Tilt Rotor Carbon Fiber-Reinforced Polymer (CFRP) Wing
21/04/2024 -
The evolution of aircraft wing development has seen significant progress since the early days of aviation, with static testing emerging as a crucial aspect for ensuring safety and reliability. This...
Aerospace, Vol. 11, Pages 325: Analysis and Design of Bat-Like Flapping-Wing Aircraft
22/04/2024 -
As the only flying mammal in nature, bats have superb flight skills and aerodynamic characteristics that have been the subject of research by scholars from all over the world. In recent years, the...
Aerospace, Vol. 11, Pages 333: Computational Mechanics for Turbofan Engine Blade Containment Testing: Fan Case Design and Blade Impact Dynamics by Finite Element Simulations
24/04/2024 -
The harsh environment during airplane take-off and flights with complex operating conditions require a high dynamic and impact resistance capability of airplane engines. The design, development, and...
Aerospace, Vol. 11, Pages 332: Research on the Calculation Method of Propeller 1P Loads Based on the Blade Element Momentum Theory
23/04/2024 -
Aircraft propellers produce relatively large in-plane loads, called propeller 1P loads, during maneuvers such as turning, diving, and lifting, and these loads can negatively affect the flight and...
Aerospace, Vol. 11, Pages 334: Analysis of Flight Loads during Symmetric Aircraft Maneuvers Based on the Gradient-Enhanced Kriging Model
24/04/2024 -
The analysis of flight loads during symmetric aircraft maneuvers is an essential but computationally intensive task in aircraft design. The significant structural elastic deformation in modern...
Aerospace, Vol. 11, Pages 343: Flight Trainee Performance Evaluation Using Gradient Boosting Decision Tree, Particle Swarm Optimization, and Convolutional Neural Network (GBDT-PSO-CNN) in Simulated Flights
25/04/2024 -
Flight simulation training is one of the most important methods in early-stage civil aviation flight training. In this regard, flight simulation competitions are effective tools for evaluating the...
Aerospace, Vol. 11, Pages 342: Investigation of the Internal Flow Characteristics of a Tiltrotor Aircraft Engine Inlet in a Gust Environment
25/04/2024 -
In the vertical take-off and landing (VTOL) state of tiltrotor aircraft, the inlet entrance encounters the incoming airflow at a 90° attack angle, resulting in highly complex internal flow...
Aerospace, Vol. 11, Pages 322: Sensitivity Analysis for Design Parameters of Electric Tilt-Rotor Aircraft
20/04/2024 -
In recent years, there has been rapid development in electric aircraft, particularly electric vertical takeoff and landing (eVTOL) aircraft, as part of efforts to promote green aviation. During the...
Aerospace, Vol. 11, Pages 319: Dynamic Analysis of Three-Rotor System with Hollow Shaft under Clutch Misalignment
19/04/2024 -
Rotor system of aviation engines is often made of multiple rotors connected by the clutch. Due to manufacturing and assembly errors, there is a clutch misalignment, including the parallel...
Assessment of the Development Performance of Additive Manufacturing VPP Parts Using Digital Light Processing (DLP) and Liquid Crystal Display (LCD) Technologies
24/04/2024 -
Non-metallic additive manufacturing technology has seen a substantial improvement in the precision of the parts it produces. Its capability to achieve complex geometries and very small dimensions...
In-Plane Mechanical Characterization of a Kevlar® Composite
25/04/2024 -
Polymer-based composites are widely used in the automotive, security, aeronautical and space industries, to mention a few. This is because of their good mechanical properties, which are similar to...
A novel strategical approach to mitigate low velocity impact damage in composite laminates
22/04/2024 -
Strategic interleaving methodology to improve composite laminates' low velocity impact (LVI) damage resistance.This paper describes a new interleaving methodology to improve composite laminates' low...
Aerospace, Vol. 11, Pages 313: Data-Driven 4D Trajectory Prediction Model Using Attention-TCN-GRU
17/04/2024 -
With reference to the trajectory-based operation (TBO) requirements proposed by the International Civil Aviation Organization (ICAO), this paper concentrates on the study of four-dimensional...
