Electric
Electric
Comminution of Metal–Polymer Composites for Recycling
18/04/2024 -
Plates of polymers were ground in a hammer mill with different pretreatments. With the results, it is possible to create a better understanding of the comminution of polymers and transfer the results...
Tailoring the Properties of Gel Polymer Electrolytes for Sodium?Ion Batteries Using Ionic Liquids: A Review
24/04/2024 -
The review paper features the use of ionic liquids in tuning the properties of gel polymer electrolytes for sodium?ion batteries. We aim to give the readers some general context of the structure and...
Aerospace, Vol. 11, Pages 329: The Reliability Modeling and Evaluation of a Cusped Field Thruster When Undertaking a Gravitational Wave Detection Mission
23/04/2024 -
The propulsion system, particularly electric propulsion, holds immense significance in the context of gravitational wave detection missions. One of the key factors of a deep space exploration mission...
Aerospace, Vol. 11, Pages 322: Sensitivity Analysis for Design Parameters of Electric Tilt-Rotor Aircraft
20/04/2024 -
In recent years, there has been rapid development in electric aircraft, particularly electric vertical takeoff and landing (eVTOL) aircraft, as part of efforts to promote green aviation. During the...
Synthesis and Electrical Properties of a New Bipolar Material Using Spacer Moiety
24/04/2024 -
To develop a deep-blue emitter, a molecule with bipolar characteristics was designed as a donor-spacer-acceptor type, in which 9-(4-(4,6-diphenyl-1),3,5-triazin-2-yl)-2,5-dimethylphenyl)-9H-carbazole...
Design Analysis of Mass Timber and Volumetric Modular Strategies as Counterproposals for an Existing Reinforced Concrete Hotel
19/04/2024 -
Construction professionals work in silos and use traditional design and construction methods. The growing demand for rapidly built and high-quality construction is making off-site manufacturing...
The Impact of Building Information Modeling Technology on Cost Management of Civil Engineering Projects: A Case Study of the Mombasa Port Area Development Project
21/04/2024 -
Introduction: This study examines the impact of building information modeling on the cost management of engineering projects, focusing specifically on the Mombasa Port Area Development Project. The...
A Machine Learning Model to Predict the Seismic Lifecycle Behavior of a Cross-Sea Cable-Stayed Bridge
23/04/2024 -
Cross-sea cable-stayed bridges encounter challenges associated with cable corrosion and cable-force relaxation during their service life, which significantly affects their structural performance and...
Durability of Ternary Blended Concrete Incorporating Rice Husk Ash and Calcined Clay
24/04/2024 -
Research on the combined substitution of supplementary cementitious materials (SCMs) has already demonstrated that it might be one of the few viable options to produce low-carbon concrete at scale....
Utilizing Metal Oxide Thin Films for Device Engineering of Solution-Processed Organic Multi-Junction Solar Cells
24/04/2024 -
Electron and hole transporting layers play a major role in high-performance and stable organic-based optoelectronic devices. This paper demonstrates detailed device engineering of multi-junction...
Tribological Performance of a Paraffinic Base Oil Additive with Coated and Uncoated SiO2 Nanoparticles
25/04/2024 -
Electric vehicles (EVs) have emerged as a technology that can replace internal combustion vehicles and reduce greenhouse gas emissions. Therefore, it is necessary to develop novel low-viscosity...
Impact of Surface States in Graphene/p-Si Schottky Diodes
25/04/2024 -
Graphene–silicon Schottky diodes are intriguing devices that straddle the border between classical models and two-dimensional ones. Many papers have been published in recent years...
Influence of TiO2 Nanoparticles on the Physical, Mechanical, and Structural Characteristics of Cementitious Composites with Recycled Aggregates
25/04/2024 -
The aim of this study is to analyze the effect of the addition of TiO2 nanoparticles (NTs) on the physical and mechanical properties, as well as the microstructural changes, of cementitious...
Production of Stable Electrically Conductive PVDF Membranes Based on Polydopamine-Polyethyleneimine—Assisted Deposition of Carbon Nanotubes
-
Electrically conductive membranes (ECMs) have emerged as a multifunctional separation technology that integrates membrane filtration with electrochemical reactions. Physical stability remains a...
Self-Powered UV Photodetector Construction of the P(EDOS-TTh) Copolymer-Modified ZnO Nanoarray
20/04/2024 -
To solve the problem that zinc oxide nanorods (ZnO NRs)-based self-powered ultraviolet (UV) photodetectors cannot obtain both higher responsiveness and shorter response time, P(EDOS-TTh) was prepared...
Additive Manufacturing of Electrically Conductive Multi-Layered Nanocopper in an Air Environment
25/04/2024 -
The additive manufacturing (AM) of functional copper (Cu) parts is a major goal for many industries, from aerospace to automotive to electronics, because Cu has a high thermal and electrical...
Structural, Optical and Dielectric Properties of Some Nanocomposites Derived from Copper Oxide Nanoparticles Embedded in Poly(vinylpyrrolidone) Matrix
25/04/2024 -
Polymer nanocomposite films based on poly(vinyl pyrrolidone) incorporated with different amounts of copper oxide (CuO) nanoparticles were prepared by the solution casting technique. The PVP/CuO...
Ultrarobust Actuator Comprising High-Strength Carbon Fibers and Commercially Available Polycarbonate with Multi-Stimulus Responses and Programmable Deformation
19/04/2024 -
Polymer-based actuators have gained extensive attention owing to their potential applications in aerospace, soft robotics, etc. However, poor mechanical properties, the inability of multi-stimuli...
High-Performance, Easy-to-Fabricate, Nanocomposite Heater for Life Sciences and Biomedical Applications
20/04/2024 -
Microheaters are used in several applications, including medical diagnostics, synthesis, environmental monitoring, and actuation. Conventional microheaters rely on thin-film electrodes...
Ag-MWCNT Composites for Improving the Electrical and Thermal Properties of Electronic Paste
22/04/2024 -
With the development of microelectronics products with high density and high power, it is urgent to improve the electrical and thermal conductivity of electronic paste to achieve the new requirements...
Evaporation-Driven Energy Generation Using an Electrospun Polyacrylonitrile Nanofiber Mat with Different Support Substrates
23/04/2024 -
Water evaporation-driven energy harvesting is an emerging mechanism for contributing to green energy production with low cost. Herein, we developed polyacrylonitrile (PAN) nanofiber-based...
