Construction
Construction
Low Dielectric and High Thermal Conductive Phononic Crystal Nanofiber Metamaterial Film
23/04/2025 -
A phononic crystal nanofiber film is fabricated via localized crystallization of polyimide (PI) induced by boron nitride nanosheets. The aligned crystalline domains form efficient phonon transport...
Lowering Toxicity of Solvent in Organic Solar Cells Manufacturing for 20% Efficiency
23/04/2025 -
The acute toxicological properties of the solvents commonly used in the organic photovoltaic (OPV) are evaluated. The preparation technology of devices and micro‐modules by developing solvent...
High‐Throughput Multiplexed Plasmonic Color Encryption of Microgel Architectures via Programmable Dithering‐Mask Flow Microlithography
23/04/2025 -
This study introduces a scalable method for creating microgel structures with multiplexed hidden plasmonic colors via in situ grown AgNPs in porosity modulated hydrogel network. Utilizing advanced...
High‐Performance Coupled Nanogenerators Based on Electrospun Porous PU@PVDF‐ZnO Nanofibers with Core–Shell Structure
20/04/2025 -
This article primarily investigates the outstanding performance characteristics of nanofiber membranes prepared via the electrostatic spinning method and provides a detailed account of the...
Aerosol Jet Printing of Hybrid Ti3C2Tx MXene/PEDOT:PSS Nanospheres for Flexible Planar/Fiber Architectured Micro‐Supercapacitors
20/04/2025 -
MXene/PEDOT:PSS‐based planar and fiber‐architectured flexible supercapacitors (FSCs) are fabricated using aerosol jet printing (AJP) technology. The 3D MXene‐wrinkled spherical connected by...
Transparent Nanocrystalline Hydroxyapatite Bioceramics Prepared by High Pressure and Room Temperature Compaction
20/04/2025 -
This study demonstrates that high pressure alone can effectively drive the densification of nanocrystalline hydroxyapatite compacts without the need for external heating. At pressures exceeding...
Numerical Simulation of Expansion Deformation of the TiNiFe Shape Memory Alloy Ring
18/04/2025 -
A novel test method is developed to establish a finite element simulation model of TiNiFe shape memory alloy ring expansion deformation at cryogenic temperatures. The effects of the angle α and ring...
Retarding the Growth Kinetics of Chemical Bath Deposited Nickel Oxide Films for Efficient Inverted Perovskite Solar Cells and Minimodules
21/04/2025 -
An amino‐alcohol ligand with strong binding affinity to Ni2+ is employed to modulate the growth kinetics of chemical bath deposited NiOx for preparing compact NiOx film with superior coverage,...
An Implantable In‐Hydrogel Wireless Supercapacitor‐Activated Neuron System Enables Bidirectional Modulation
21/04/2025 -
An implantable wireless supercapacitor‐activated neuro (W‐SCAN) system consisting of the coil, diode bridge circuit, in‐hydrogel supercapacitor, and stimulation electrodes has been developed...
Solution‐Processable PEDOT for Organic Solar Cells: From One‐Pot Synthesis to Kinetically‐Controlled Polymerization
21/04/2025 -
It is shown that the synthesis of solution‐processable poly(3,4‐ethylenedioxythiophene) (PEDOT) hole transporting materials (HTMs) follows the principle of oxidative polymerization‐induced...
Colored Radiative Cooling: from Photonic Approaches to Fluorescent Colors and Beyond
17/04/2025 -
Colored radiative cooling (CRC) has become a prevailing technology for achieving colorful appearance and simultaneously enhancing the effective solar reflectance of cooling coatings. This review...
Correction to “Sequential Assembly of Cell‐Laden Hydrogel Constructs to Engineer Vascular‐Like Microchannels”
18/04/2025 -
This study investigates the temporal effects of galactose and manganese on the N‐glycosylation of Trastuzumab (mAb) antibody during fed‐batch and perfusion bioprocessing modes to reveal the...
High‐Performance Recyclable Polyester Elastomers Through Transient Strain‐Stiffening
16/04/2025 -
Transient strain‐crystallization simultaneously strengthens and toughens block polyester elastomers while conserving recyclability. Using controlled polymerization catalysis and commercial...
3D Printing of Aluminum Alloys by Vat Photopolymerization Using Radical Inhibitors
10/04/2025 -
This study demonstrates enhanced photopolymerization stability of AA5052 slurry through tert‐butylhydroquinone inhibitor incorporation. Utilizing DLP‐based 3D printing, high‐resolution green...
Responsive Ordered Assembly of Magnetic Nanoparticles for ROS Activatable Magnetic Particle Imaging
14/04/2025 -
The reactive oxygen species (ROS)‐responsive ordered assembly of magnetic nanoparticles (RMNAs) achieve a ROS‐dependent off/on MPI signal regulation through the ordered...
Decoding Directional Control in Metal‐Assisted Chemical Etching via Catalyst Architecture
14/04/2025 -
Metal‐assisted chemical etching (MaCE) enables silicon nanostructure fabrication but suffers from isotropic undercutting. This study highlights the critical role of catalyst morphology in etching...
Legumain In Situ Engineering Promotes Efferocytosis of CAR Macrophage to Treat Cardiac Fibrosis
14/04/2025 -
In this research article, the authors found that the overwhelming apoptotic cells after myocardial infarction (MI) result in an overburdened efferocytosis in CAR‐MΦ, which compromises their...
High‐Performance Integrated Micro‐Vortex Air Filter Enabled With Honeycomb‐Like Structured Nanofibrous Networks
14/04/2025 -
A cellular cell micro‐vortex air filter constructed by 3D honeycomb‐like structured nano‐networks is created by a unique electro‐netting‐assembly technique. Due to the micro‐vortex...
