Others
Others
Integrating Electrochemically Grown Nano?Oxide and Polymer Films for Electrochromic Device: Achieving NIR Shielding & Four?Digit Efficiency
24/04/2024 -
Electrochemically deposited thin films yield high uniformity, a property which is quite vital to in the context of electrochromic coatings and devices. Tungsten oxide and polyaniline are two such...
Comminution of Metal–Polymer Composites for Recycling
18/04/2024 -
Plates of polymers were ground in a hammer mill with different pretreatments. With the results, it is possible to create a better understanding of the comminution of polymers and transfer the results...
The simultaneous removal of methylene blue (MB) and Ca2+ by recyclable adsorbents based the scales derived from coal gasification system
24/04/2024 -
The transformation of solid wastes from industrial production into effective adsorbents could significantly contribute to wastewater treatment. In this study, after acidizing and burning soft...
Inhibiting stress corrosion cracking of a prefabricated surface?defective magnesium alloy thanks to biological organic components
18/04/2024 -
Biomedical magnesium (Mg) alloys remain a challenge for their mainstream application, because the combination of bio?mechanical stress and corrosive physiological environment leading to stress...
Preparation, structure, and properties of biodegradable core?sheath composite fibers derived from poly (butylene adipate?co?terephthalate) and polylactic acid
23/04/2024 -
Fluorescence of EBS?g?MA/CDs NanocompositesAbstractCarbon dots (CDs) are an interesting nanomaterial due to their tunable photoluminescence and other functional properties. Herein, by introducing...
Corrosion protection of photocured coatings containing highly crosslinked SU-8 epoxy resin
22/04/2024 -
AbstractIn this study, a series of photocured epoxied films (SAU-0, SAU-5, SAU-10 and SAU-15) were prepared and applied to the galvanized steel surface for corrosion...
Keratin-modified waterborne polyurethane: an alternative circular economy technology for adding value to cattle hair waste from leather tanneries
24/04/2024 -
AbstractWaterborne polyurethane (WPU) has excellent performance because of its special soft and hard segments in polymer chains, but the relatively high cost, poor water vapor permeability, and...
Synthesis and characterization of a Dion–Jacobson two-dimensional perovskite
22/04/2024 -
Abstract Two-dimensional (2D) metal halide perovskites feature several specific advantages over others 2D materials, such as facile wet chemical synthesis and layers...
Synthesis of low-temperature irreversible thermochromic indicator based on functional polydiacetylene for food storage applications
21/04/2024 -
Abstract Thermochromic materials are of great interest because of their color transition characteristic as a function of temperature, and this property may find potential...
Bifunctional electrocatalyst for oxygen reduction/evolution reactions based on controlled morphology of nickel–cobalt nanoprickly particles composited by graphene and carbon nanotube
20/04/2024 -
Abstract This paper presents the nickel–cobalt nanoprickly particles (PNi2Co3) composited with graphene nanosheets (GNs) and carbon nanotubes (CNT), prepared via the one-pot...
Effect of CH4 concentration on the early growth stage of patterned diamond using high seeding density and hot filament chemical vapor deposition
18/04/2024 -
Abstract A bottom-up method is described to grow patterned polycrystalline diamond on silicon substrates using polymer assisted seeding and photolithography. Diamond seeding...
Aerospace, Vol. 11, Pages 325: Analysis and Design of Bat-Like Flapping-Wing Aircraft
22/04/2024 -
As the only flying mammal in nature, bats have superb flight skills and aerodynamic characteristics that have been the subject of research by scholars from all over the world. In recent years, the...
Aerospace, Vol. 11, Pages 326: Research on Solving the Structural Instability of Composite Propellants by Using Non-Ablative Cladding Layers
22/04/2024 -
In a high-temperature test of the gas generator with a free-loading composite propellant, an abnormal jitter appeared in the latter part of the internal ballistic curve, whereas no such abnormality...
Aerospace, Vol. 11, Pages 336: On-Board Image Enhancement on Remote Sensing Payload
24/04/2024 -
CubeSats are designed to optimize applications within the strict constraints of space and power. This paper presents an On-Board Image Enhancement technique for remote sensing payloads, focusing on...
Synthesis and Electrical Properties of a New Bipolar Material Using Spacer Moiety
24/04/2024 -
To develop a deep-blue emitter, a molecule with bipolar characteristics was designed as a donor-spacer-acceptor type, in which 9-(4-(4,6-diphenyl-1),3,5-triazin-2-yl)-2,5-dimethylphenyl)-9H-carbazole...
A Temporal Methodology for Assessing the Performance of Concatenated Codes in OFDM Systems for 4K-UHD Video Transmission
24/04/2024 -
The communication channel is a critical part of the process of information degradation. In the 4K ultra-resolution video transmission domain, the communication channel is a crucial part where...
Finite Element Analysis on the Seismic Performance of Concrete-Filled Steel Tube Columns with a Multiple-Chamber Round-Ended Cross-Section
19/04/2024 -
This study proposes a form of concrete-filled steel tube column with a multiple-chamber round-ended cross-section (M-CFST). Longitudinal and transverse stiffening ribs divide the circular-ended...
Rotational Stiffening Performance of Roof Folded Plates in Torsion Tests and the Stiffening Effect of Roof Folded Plates on the Lateral Buckling of H Beams in Steel Structures
19/04/2024 -
Non-structural members, such as roofs and ceilings, become affixed to main beams that are known as structural members. When such main beams experience bending or compressive forces that lead to...
A Numerical Investigation of the Influence of Humid Environments on the Thermal Performance of a Phase Change Thermal Storage Cooling System in Buildings
19/04/2024 -
Phase change thermal energy storage (PCTES) technology has garnered significant attention in addressing thermal management challenges in building HVAC systems. However, the cooling performance of...
Unveiling Gender-Based Musculoskeletal Disorders in the Construction Industry: A Comprehensive Analysis
21/04/2024 -
Without physically intensive building, modern infrastructure development would be impossible. Musculoskeletal diseases (MSDs) and other occupational health issues may arise in such a demanding...
Feasibility of Recycled Aggregate Concrete in a Novel Anchoring Connection for Beam-to-Concrete-Filled Steel Tube Joints
21/04/2024 -
Owing to the substantial benefits in environmental protection and resource saving, recycled aggregate concrete (RAC) is increasingly used in civil engineering; among the different types, RAC-filled...
