Advanced materials
Advanced materials
Evaluation of composites based on virgin rubber/devulcanized rubber reinforced with chemically and radiation activated polyurethane scrap for possible applications
13/04/2024 -
Utilization of virgin rubber/devulcanized rubber composite reinforced with activated polyurethane scrap for flexible tiles application.Reusing industrial waste is one of the new tactics being used to...
Operating Properties of Deep Hole Boring Tools with Modified Design
28/03/2024 -
This paper presents the results of research work on the revised design of a deep hole boring tool. The study was divided into three stages: theoretical, experimental and operational. In the...
New role of ionic liquid as accelerator activator in rubber compounds and its influence on curing and mechanical properties
18/03/2024 -
Interaction of Ionic liquid in rubber compounds in presence of activator and accelerator.This study focuses on the effect of ionic liquids (ILs) on the cure characteristics and filler dispersion of...
Insights into the tiger stripe phenomenon of polypropylene and its blend in injection molding with a rapid heat exchange mold
28/02/2024 -
In this paper, pulverized coal is ball?milled and modified, and added into styrene?butadiene rubber together with modified carbon black. The effect of coal/carbon black hybrid filler on the...
Performance of Full-Component Coal Gasification Fine Slag: High-Value Utilization as Reinforcing Material in Styrene-Butadiene Rubber (ESBR) for Replacing Carbon Black
15/02/2024 -
Ultrafine, highly active coal gasification slag (HCGS) was produced via a sustainable, green dry-ball-milling method. Coal gasification fine slag (CGS), a potential environmental pollutant, was used...
Microbiome Structure of Activated Sludge after Adaptation to Landfill Leachate Treatment in a Lab-Scale Sequencing Batch Reactor
09/01/2024 -
During adaptation to waters that are rich in xenobiotics, biological systems pass through multiple stages. The first one is related to the restructuring of communities, pronounced destruction of the...
Fatigue?crack?propagation behavior and mechanism of long hemp?fiber?enhanced styrene–butadiene rubber/carbon black compounds
06/12/2023 -
The length of hemp fibers in the rubber matrix under internal mixing/extrusion.Biomass renewable fiber has the advantages of low cost and environmental friendliness; however, its application as a...
Cationic PS Microspheres Modified GO and its effect on the properties of SBR/BR Rubber Composite materials
02/12/2023 -
Abstract To enhance the dispersion and compatibility of graphite oxide (GO) in the rubber matrix, a new method of functional polymer modifying GO was proposed in this study. PS...
The Effect of Nanosilica on Mechanical and Swelling Resistance Properties of Ternary Rubber (NR/SBR/NBR) Blends Nanocomposites with and without Bis(Triethoxysilylpropyl)Tetrasulfane
02/12/2023 -
The production of a new class of plastics with improved properties can be achieved through polymer blends rather than using individual components. This study involved the preparation of...
Flame retardancy and mechanical properties of epoxy resin with the phytic acid?derived flame retardant
14/10/2023 -
Schematic diagram of reaction mechanism and comparison of mechanical properties.AbstractIn this article, Styrene butadiene rubber/poly?p?phenylene terephthamide (SBR/PPTA) nanocomposite was...
Study on the Rheological Performance and Microscopic Mechanism of PPA/SBS/SBR Composite-Modified Asphalt Cold Replenishment Liquid
11/10/2023 -
To prepare high-performance asphalt cold replacement liquids, a composite modification preparation process was used to synthesize a styrene–butadiene–styrene (SBS) block...
Effect of Silicone Oil on Properties and Performance of Ceramizable Styrene-Butadiene Rubber-Based Composites
28/07/2023 -
New trends in the circular economy and sustainability are pointing towards the gradual elimination of standard flame retardants such as phosphorus compounds or halogenated compounds. New solutions...
Investigation on the Rheological Properties and Microscopic Characteristics of Graphene and SBR Composite Modified Asphalt
21/07/2023 -
Styrene-butadiene rubber (SBR) is commonly used as a modifier to enhance the low-temperature performance of asphalt. However, it is worth noting that while SBR modified asphalt exhibits good...
An Innovative Absorption Propagation System Hollow Block Made of Concrete Modified with Styrene–Butadiene Rubber and Polyethylene Terephthalate Flakes to Reduce the Propagation of Mechanical Vibrations in Walls
16/07/2023 -
This paper discusses an innovative APS hollow block wall with a frame made of concrete modified with recycled materials. The technical data of the hollow block, the percentages of the recycled...
Waste material fly ash as an alternative filler for elastomers
16/06/2023 -
Fly ash (FA), a by?product of the power generation industry, can potentially be used as a filler in polymer products. Particularly, FA has been investigated as an alternative filler to partially or...
A Study on Development of New Type Rubber Boot for Sleeper Floating Track System (STEDEF): Materials and Shapes
27/02/2023 -
Urban railway sleeper floating track (STEDEF) reduces the block vibration transmitted to the subgrade structure by structurally separating the sleeper and the concrete bed, using a rubber boot and a...
Effect of heat treatment on the performance of 3D printed thermoplastic polyurethane flexible substrates
13/02/2023 -
AbstractTo expand the application of natural resources in the green rubber industry and reduce the dependence of rubber additives on the non?renewable petrochemical resources, a novel cardanol?based...
Strengthening effect of phosphate sludge by-product and styrene-butadiene rubber on the properties of high-density polyethylene composites
-
In this study, phosphate sludge (PS) by-product was newly identified as a particulate reinforcement for high-density polyethylene (HDPE) composites. Furthermore, to offer a suitable...
Reinforcing styrene?butadiene rubber by silica/carbon black by?product composite through an in?situ polymerization process
22/10/2022 -
The manufacturing process of SiO2/CBP composite materials via an in?situ polymerization process.Acetylene (C2H2) production generates a large amount of carbon black by?product (CBP). It increases...
Mechanical and thermal performances of styrene butadiene rubber nanocomposites with boron nitride nanosheets, carbon nanotubes, and the hybrid filler system
14/10/2022 -
Preparation of rubber nanocomposites using two or more nanofillers with different geometries is a new and promising approach. In this work, the effects of boron nitride nanosheets (BNNS), carbon...
Detailed understanding of the carbon black–polymer interface in filled rubber composites
-
To characterize the nature of the interface between styrene-butadiene rubber (SBR) and carbon black (CB) in a filled rubber compound, we introduce an extraction protocol that uses toluene solvent...
