Automotive
Automotive
Comminution of Metal–Polymer Composites for Recycling
18/04/2024 -
Plates of polymers were ground in a hammer mill with different pretreatments. With the results, it is possible to create a better understanding of the comminution of polymers and transfer the results...
Tailoring the Properties of Gel Polymer Electrolytes for Sodium?Ion Batteries Using Ionic Liquids: A Review
24/04/2024 -
The review paper features the use of ionic liquids in tuning the properties of gel polymer electrolytes for sodium?ion batteries. We aim to give the readers some general context of the structure and...
Barium titanate exposure on metallographic and mechanical performance of coir fiber made low?density polyethylene composite
22/04/2024 -
Technological growth and biodegradable waste natural fibers are significant choices in polymer matrix composite preparation because of their distinct qualities from monopoly matrix. During the...
Edge AI-Enabled Road Fixture Monitoring System
25/04/2024 -
Effective monitoring of road fixtures is essential for urban safety and functionality. However, traditional inspections are time-consuming, costly, and error prone, while current automated solutions...
In-Plane Mechanical Characterization of a Kevlar® Composite
25/04/2024 -
Polymer-based composites are widely used in the automotive, security, aeronautical and space industries, to mention a few. This is because of their good mechanical properties, which are similar to...
Curcumin Inhibits α-Synuclein Aggregation by Acting on Liquid–Liquid Phase Transition
23/04/2024 -
Parkinson’s disease (PD), the second most common neurodegenerative disorder, is linked to α-synuclein (α-Syn) aggregation. Despite no specific drug being...
Flexural Response of Functionally Graded Rubberized Concrete Beams
22/04/2024 -
Recycling rubber and/or steel fiber components of waste tires in construction applications is a venue for maximizing the recycling rate of these items. Additionally, it supports the move towards...
Tribological Performance of a Paraffinic Base Oil Additive with Coated and Uncoated SiO2 Nanoparticles
25/04/2024 -
Electric vehicles (EVs) have emerged as a technology that can replace internal combustion vehicles and reduce greenhouse gas emissions. Therefore, it is necessary to develop novel low-viscosity...
Recycling of Industrial Waste as Soil Binding Additives—Effects on Soil Mechanical and Hydraulic Properties during Its Stabilisation before Road Construction
25/04/2024 -
To improve the in situ soil stabilization, different chemical additives are used (ion exchange compounds, additives based on H2SO4 or vinyl polymers, and organic additives using lignosulfonates). One...
High-Resolution Ultrasound to Quantify Sub-Surface Wrinkles in a Woven CFRP Laminate
25/04/2024 -
Carbon fiber reinforced polymer (CFRP) composites are popular materials in the aerospace and automotive industries because of their low weight, high strength, and corrosion resistance. However,...
Additive Manufacturing of Electrically Conductive Multi-Layered Nanocopper in an Air Environment
25/04/2024 -
The additive manufacturing (AM) of functional copper (Cu) parts is a major goal for many industries, from aerospace to automotive to electronics, because Cu has a high thermal and electrical...
Enhancing the Strength and the Environmental Performance of Concrete with Pre-Treated Crumb Rubber and Micro-Silica
24/04/2024 -
Dumped non-biodegradable tires present a significant environmental threat, with overflowing landfills and associated health risks highlighting the urgency of tire waste disposal. Current disposal...
Supercurrent in the Presence of Direct Transmission and a Resonant Localized State
-
We study the current-phase relation (CPR) of an InSb-Al nanowire Josephson junction in parallel magnetic fields up to 700 mT. At high magnetic fields and in narrow voltage intervals of a gate under...
Sustainable characterization of brake pads using raw/silane?treated Mimosa pudica fibers for automobile applications
22/04/2024 -
Mimosa pudica fibers based brake pads: Development and characterization.The demand for bio?fiber composites has increased globally due to the environmental impact of non?sustainable materials. In...
Effect of varying core density and material on the quasi?static behaviors of sandwich structure with 3D?printed hexagonal honeycomb core
22/04/2024 -
The quasi?static behaviors on sandwich composite of 3D?printed hexagonal honeycomb core structure.Additive manufacturing (AM) involves the development of complex, lightweight sandwich structures for...
Impact of molybdenum disulfide diffused coir fiber on the physical, mechanical, thermal, and vibrational characteristics of polyester composites
24/04/2024 -
The whole methodology of the study is represented in graphical form.This research focuses on comparing the properties of molybdenum disulfide (MoS2) diffused coir fiber polyester composites (MCF?PCs)...
The Synthesis and Characterization of Geopolymers Based on Metakaolin and on Automotive Glass Waste
18/04/2024 -
The presented article studies a metakaolin-based geopolymer matrix for which two types of non-recyclable automotive glass waste (AGW) have been used as an alternative aggregate. Their composition and...
Operational Strategy of a DC Inverter Heat Pump System Considering PV Power Fluctuation and Demand-Side Load Characteristics
18/04/2024 -
With the increase in application of solar PV systems, it is of great significance to develop and investigate direct current (DC)-powered equipment in buildings with flexible operational strategies. A...
Measurements and Evaluation of Road Traffic-Induced Micro-Vibration in a Workshop Equipped with Precision Instruments
18/04/2024 -
Road traffic transportation has flourished in the process of urbanization due to its advantages, but concurrently it generates harmful environmental vibrations. This vibration issue becomes...
Research Progress on Rashba Effect in Two-Dimensional Organic–Inorganic Hybrid Lead Halide Perovskites
16/04/2024 -
The Rashba effect appears in the semiconductors with an inversion–asymmetric structure and strong spin-orbit coupling, which splits the spin-degenerated band into two sub-bands with...
