Others

 

Others

A comprehensive dimensional analysis of waste?derived reinforcements in interface interactions with semi?bio?based PA6,10 composites
12/02/2024 - The effect of different waste sources on the performance of semi?bio based PA6,10.This study elucidates interfacial interactions in semi?synthetic polyamides by applying dimensional analysis to...
Real-Time Monitoring of Dough Quality in a Dough Mixer Based on Current Change
05/02/2024 - Accurate assessment of dough kneading is pivotal in pasta processing, where both under-kneading and over-kneading can detrimentally impact dough quality. This study proposes an innovative approach...
Expansion Injection Molding Process Using Clamping Force for Melt Compression
02/02/2024 - Melt expansion followed by compression has been utilized for high-speed filling. In general, this technology was developed for a machine level. Recently, mold-level technology has been tried. In this...
Preparation of Polyimide/Ionic Liquid Hybrid Membrane for CO2/CH4 Separation
31/01/2024 - Imidazole ionic liquids (ILs) have good affinity and good solubility for carbon dioxide (CO2). Such ionic liquids, combined with polyimide membrane materials, can solve the problem that, today, CO2...
Aerospace, Vol. 11, Pages 93: Flow Structure behind Spanwise Pin Array in Supersonic Flow
19/01/2024 - This work focused on the experimental characterization of a complex flow structure behind a cross-flow array of cylindrical pins installed on the wall of a supersonic duct. This geometry simulates...
Development of a Silicone Rubber Mold with an Innovative Waterfall Cooling Channel
16/01/2024 - A conformal cooling channel (CCC) follows the mold core or cavity profile to carry out uniform cooling in the cooling stage. However, the significant pressure drop along the cooling channels is a...
Polypropylene nanocomposites produced by in?situ grafting of maleic anhydride using different mixing procedures
02/01/2024 - Reactive mixing strategies for the preparation of delaminated/exfoliated montmorillonite and PP nanocomposites with reduced oxygen permeability and high transparency.Nanocomposites (NC) of...
ZnO surface modification with maleic anhydride using plasma treatment
31/12/2023 - Zinc oxide (ZnO) is carbon functionalized with C–Zn bonds and by decomposition of maleic anhydride molecules through maleic anhydride plasma. ZnO with surface modification reduces poly(lactic acid)...
Analysis of the Machine-Specific Behavior of Injection Molding Machines
22/12/2023 - The performance of an injection molding machine (IMM) influences the process and the quality of the parts manufactured. Despite increasing data collection capabilities, their machine-specific...
Wet continuous mixing technology and extrusion rheological properties of carbon black/natural rubber composites
23/12/2023 - Mechanism of flocculation extrusion technology for carbon black/natural rubber composites.In order to solve the problems of dust, low mixing efficiency, and poor quality stability in dry mixing and...
Combined effect of SEBS-g-MAH and OMMT on morphological, thermal and mechanical properties of SAN/EPDM (80/20) blends
17/12/2023 - Abstract The objective of this investigation is to enhance the compatibility between the poly (styrene-co-acrylonitrile) (SAN) and ethylene-propylene-diene monomer rubber (EPDM)...
Upcycling of HDPE Milk Bottles into High-Stiffness, High-HDT Composites with Pineapple Leaf Waste Materials
13/12/2023 - In the pursuit of sustainability and reduced dependence on new plastic materials, this study explores the upcycling potential of high-density polyethylene (HDPE) milk bottles into high-stiffness,...
The effect of laboratory synthesized and modified layered double hydroxides on recycled and neat high-density polyethylene matrix properties using stearic acid as an interface modifier
02/12/2023 - Abstract This research investigated the effect of layered double hydroxides (LDH) as nanofillers on recycled and neat high-density polyethylene (HDPE) properties. Unmodified and...
Parametric Automated Design and Virtual Simulation of Building Machine Using BIM
01/12/2023 - With the continuous development of the construction technology of the main structure of high-rise buildings, traditional construction techniques have been widely used in high-rise building projects....
Selective thermal recycling for graphene growth on natural substrates: A comparative study on life cycle assessment, energy consumption, and mechanical performance in recompounding
28/11/2023 - Illustration of the PLA/BR/Clay nanocomposite microstructure alongside the SEM images.AbstractIn this work, several samples based on poly(lactic) acid (PLA)/butadiene rubber (BR) blend with and...
Well-dispersed silica nanoparticle-reinforced epoxy vitrimer composites prepared by dynamic crosslinking
29/11/2023 - Abstract Realizing nano-filler well dispersed in epoxy matrix is essential for the fabrication of high-performance epoxy composites. However, the aggregation of untreated...
Epoxidized canola oil as an environmentally friendly compatibilizer for blending poly(lactic acid) and poly(butylene adipate-co-terephthalate)
30/11/2023 - Abstract Blends of poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) are biodegradable polymers with opposite, yet complementary, physical and thermal...
Recycling of thermoset waste/high?density polyethylene composites: Examining the thermal properties
22/11/2023 - Recycling of thermoset waste/high?density polyethylene composites.In this work, an attempt was made to use recycled thermosetting polymer waste (RTPW) to reduce the environmental impacts. The RTPW...
Experimental and application of waste rubber low?temperature green regeneration through ultrasound?assisted method
19/11/2023 - Waste rubber low?temperature green regeneration through ultrasound?assisted method.Combining a traditional mixer and a custom?built ultrasonic generator, low?temperature green regeneration of waste...
Enhancing Thermomechanical Strength and Thermal Stability of Poly(dicyclopentadiene) Composites through Cost-Effective Fly Ash Reinforcement for Structural and Impact Applications
16/11/2023 - Poly(dicyclopentadiene) (poly-DCPD) is a thermoset with potential for high-performance applications. In this research, epoxy resin was blended with different concentrations of fly ash class F...
Influence of Processing Conditions on the Generation of Surface Defects in a Heat-and-Cool Hybrid Injection Molding Technique for Carbon Fiber-Reinforced Thermoplastic Sheets and Development of a Suitable Mold Heated by Far-Infrared Radiation
16/11/2023 - Recently, hybrid injection molding—a type of overmolding technology in which a short carbon fiber-reinforced thermoplastic is injection molded over a compression-molded carbon...