Others

 

Others

The comparison of polymerization activity of typical cationic quaternary ammonium salt monomers
19/01/2024 - The cationic water?soluble polymers, which are widely used in many areas such as papermaking and separation process, are typically synthesized through polymerization of cationic monomers represented...
Characterizing and Modeling Transformation-Induced Plasticity in 13Cr-4Ni Welds upon Cooling
15/11/2023 - Dilatometric experiments were conducted with the main purpose of measuring the transformation-induced coefficients of 13% chromium and 4% nickel, which are martensitic stainless steel base and filler...
Effects of Boehmite on the Calcination Shrinkage and Mechanical Properties of Gypsum?Bonded Molds
24/02/2022 - This study investigates the calcination shrinkage and mechanical properties of gypsum?bonded molds. A new filler, boehmite, is adopted to ensure the dimension accuracy while maintaining the...
Investigation of the Shrinkage Behaviour of a Fast Curing Epoxy Resin as a Function of Moisture, Gas Content and the Mixing ratio
- Changes in the specific volume during the processing of thermosetting resin systems result in reduced dimensional accuracy of the components due to residual stresses and, in the case of fibre...
Hygrothermal viscoelastic material characterisation of unidirectional continuous carbon-fibre reinforced polyamide 6
01/10/2018 - This paper presents results of material characterisation experiments on the hygrothermal viscoelastic behaviour of unidirectional laminates of continuous carbon-fibre reinforced polyamide 6. The...
Microstructure and phase composition of cordierite-based co-clinker
- The aim of this work is to study the effect of phase composition and microstructure of cordierite-based co-clinkers on the electrical properties and coefficient of thermal expansion of cordierite...