Others
Others
Enhanced Treatment of Potato Starch Wastewater Using Chitosan-Modified Biochar Film Adsorption Coupled with Ultrafiltration
29/11/2023 -
Potato starch wastewater, a byproduct of potato processing, is an escalating environmental concern due to its high concentrations of COD (chemical oxygen demand), ammonia nitrogen, and total...
The Influence of Adhesive Strategy, Type of Dental Composite, and Polishing Time on Marginal Gap Formation in Class I-like Cavities
29/11/2023 -
Even after more than six decades of dental composite invention (1962), there is still controversial information about the time in which composite restorations should be polished in order to avoid...
A Diamond/Graphene/Diamond Electrode for Waste Water Treatment
29/11/2023 -
Boron-doped diamond (BDD) thin film electrodes have great application potential in water treatment. However, the high electrode energy consumption due to high resistance directly limits the...
Achieving Order in Disorder: Stabilizing Red Light-Emitting α-Phase Formamidinium Lead Iodide
29/11/2023 -
While formamidinium lead iodide (FAPbI3) halide perovskite (HP) exhibits improved thermal stability and a wide band gap, its practical applicability is chained due to its room temperature phase...
Impact of Sapphire Step Height on the Growth of Monolayer Molybdenum Disulfide
30/11/2023 -
Although the synthesis of molybdenum disulfide (MoS2) on sapphire has made a lot of progress, how the substrate surface affects the growth still needs to be further studied. Herein, the impact of the...
Tensile properties of flexible composites with knitted reinforcements from various yarn materials
27/11/2023 -
Schematic steps for the manufacturing and mechanical testing of the flexible composites along with visualized differences in strain under tensile load.The tensile behavior of a flexible epoxy resin...
Stretchable polydimethylsiloxane/aligned electrospun cellulose acetate nanofibers composites with high transparency and fracture resistance
27/11/2023 -
The PDMS/CANFs composites prepared by electrospinning CA as the reinforcing material of PDMS have high transparency and good fracture toughness.Polydimethylsiloxane (PDMS) is recognized as an...
Novel approach to enhance the optical and electrical properties of polymer electrolytes using phenol red dye
27/11/2023 -
The figure emphasizes the probabilistic interaction between the electrolyte matrix and Phenol red dye. It also picturises the important characterizations carried out in the present work.This article...
Preparation, characterization, and CO2 permeation testing of cellulose acetate and polyimide blend membranes
28/11/2023 -
Blend membranes of cellulose acetate and polyimide were prepared and tested for CO2/CH4 separation. Blend membranes showed enhanced CO2 permeability.Membrane?based CO2 separation is vital for various...
Targeted theranostics agent based on polydopamine/hyaluronic acid nanoparticles for MRI and photothermal therapy
28/11/2023 -
Theranostics based on magnetic resonance imaging (MRI) and photothermal therapy can provide high?resolution imaging with the minimum side effect of cancer treatment. In this research, polydopamine...
Effect of solvent and thermal annealing on D18/Y6 polymer solar cells
23/11/2023 -
Abstract Organic solar cells (OSCs) as emerging generation solar cells are required to face climate and energy challenges. In this regard, OSCs based on the D18:Y6 active layer...
In situ SEM characterization of tensile behavior of nano-fibrous Al–Si and Al–Si–Sr eutectics
25/11/2023 -
Abstract In situ tensile testing in a scanning electron microscope was used to study the effects of fiber orientation and colony boundaries in laser-refined fully eutectic Al–Si...
Preparation and Study of Antifouling and Fouling-Release Surface Materials from Copolymers with Anchoring Functional Groups
27/11/2023 -
Marine biofouling is a worldwide problem in marine systems. Nowadays, innovative non-toxic antifouling and fouling-release materials are highly desirable. In this study, a strategy for preparing...
Effect of Mg Addition on Inclusions in the Welding Heat-Affected Zone of Pressure Vessel Steels
27/11/2023 -
With the development of the pressure vessel industry, high-energy wire welding has a great future. However, this means higher demands on the weldability of pressure vessel steels. Controlling...
Mechanical and Chemical Resistance of UV Coating Systems Prepared under Industrial Conditions Using LED Radiation
27/11/2023 -
The furniture industry constantly strives to search for ecological and cost-effective solutions in the production of wood-based composites. It is anticipated that furniture with a honeycomb core and...
Electrochemical Synthesis of Palladium–Selenide Coatings
23/11/2023 -
This research explores the electrochemical synthesis of Pd-Se coatings from acidic chloride solutions using cyclic voltammetry to understand the reaction mechanism. The study examines how the applied...
Highly Efficient Adsorption of Pb(II) by Functionalized Humic Acid: Molecular Experiment and Theoretical Calculation
23/11/2023 -
Environmental pollution has been widely considered by researchers, especially the heavy metals damage to the human and ecological environment is irreversible. Adsorption is an important method to...
Analysis of fabrics obtained during the archeological excavation sites in Israel
22/11/2023 -
The aim of this work is to determine the type of material in the given unknown fabric which was excavated from the various archeological sites in Israel using advanced material technology. The four...
An investigation of structural, optical, and electrical properties of poly(3?hexylthiophene)/reduced graphene oxide nanocomposites for electronic and optoelectronic applications
20/11/2023 -
Poly(3?hexylthiophene)/reduced graphene oxide nanocomposites (P3HT/rGO) were successfully prepared starting with 3?hexylthiophene (3HT) monomer. 1H NMR was utilized to determine the regioregularity...
Tailoring the Structural and Optical Features of PVA/SiO2-CuO Polymeric Nanocomposite for Optical and Gamma Ray Shielding Applications
21/11/2023 -
This study aims to produce novel nanocomposite films by incorporating nanostructures (SiO2 and CuO) into polyvinyl alcohol (PVA) to utilize these nanocomposites in various optoelectronic...
Synthesis of Green Cocos Nucifera L Fiber Loading Waste LDPE Composites Enriched with SiC: Performance Evaluation
23/11/2023 -
Natural fiber gained significance in polymer composites for replacing synthetic fiber. Environmental polluting low-density polyethylene (LDPE) waste recycled polymer matrix composite was...
