Health
Health
Finite Element Analysis (Fea) Study Comparing Titanium and Peek Caps in a Conometric Connection between Implant and Prosthesis
24/04/2024 -
Prosthetic retention relies on the perfect adaptation between the cap and the abutment of a dental implant. The conometric connection ensures retention similar to cemented systems, preventing...
Angiopoietin 1 Relieves Osteolysis by Promoting Macrophage Mitophagy Through the TBK1-SQSTM1 Pathway to Inhibit AIM2 Inflammasome-Mediated Pyroptosis
-
Abstract Osteolysis resulting from wear particles and subsequent aseptic loosening is a leading cause of revision surgery of artificial joints. The underlying pathogenesis of...
Advancement in ceramic biomaterials for dental implants
23/04/2024 -
There has been enormous research on diagnostic and therapeutic dental methods due to the growing recognition of oral wellness. Numerous studies in this area have resulted in dental biomaterials,...
Recent development of photoresponsive materials toward 3D printing: From materials to application
22/04/2024 -
The rapid development of 3D printing has achieved considerable progress in architecture innovation, optical advancements, energy systems, dental care, pharmaceutical delivery, and personalized...
Genetic Characterization of Gardenia jasminoides Ellis Genotypes Derived from Seeds and Selection Based on Their Morphological Traits and Flower Aromatic Substances
23/04/2024 -
Gardenia jasminoides Ellis is an evergreen shrub with white fragrant flowers, and it is cultivated for its ornamental, aromatic and medicinal value. The present study aimed to select desirable...
Assessment of the Development Performance of Additive Manufacturing VPP Parts Using Digital Light Processing (DLP) and Liquid Crystal Display (LCD) Technologies
24/04/2024 -
Non-metallic additive manufacturing technology has seen a substantial improvement in the precision of the parts it produces. Its capability to achieve complex geometries and very small dimensions...
Controlling Fluorescence Wavelength in the Synthesis of TGA-Capped CdTe Quantum Dots
21/04/2024 -
Quantum dots (QDs) are semiconductor materials, with a size range between 1–10 nm, showcasing unique size-dependent physical and chemical properties. Such properties have potentiated...
In Vitro Evaluation of Optimized PEEK Surfaces for Enhanced Osseointegration
23/04/2024 -
The materials traditionally used for implant applications, such as titanium alloys, cobalt chromium, and zirconium, often require surface modifications to achieve the desired osseointegration. These...
Optimization of Ultrasound-Assisted Extraction of Verbascum sinaiticum Leaves: Maximal Phenolic Yield and Antioxidant Capacity
19/04/2024 -
Verbascum sinaiticum (Qetetina or yeahya Joro) is a medicinal plant with secondary metabolites such as phenolics, flavonoids, glycosides, saponins, and alkaloids. This study was designed to optimize...
A Characterization of Biological Activities and Bioactive Phenolics from the Non-Volatile Fraction of the Edible and Medicinal Halophyte Sea Fennel (Crithmum maritimum L.)
23/04/2024 -
Although the biochemical composition and biological properties of the volatile fraction of the halophyte sea fennel (Crithmum maritimum L.) have been largely described, little is known about its...
Preparation and Investigation of Cellulose Acetate/Gelatin Janus Nanofiber Wound Dressings Loaded with Zinc Oxide or Curcumin for Enhanced Antimicrobial Activity
-
The skin, as the largest organ, serves as a protective barrier against external stimuli. However, when the skin is injured, wound healing becomes a complex process influenced by physiological...
Luminescent/Temperature-Sensing Properties of Multifunctional Rare-Earth Upconversion Kevlar Nanofiber Composite under 1550 nm
24/04/2024 -
The unique properties of upconversion nanoparticles (UCNPs) are responsible for their diverse applications in photonic materials, medicine, analytics, and energy conversion. In this study,...
The Effectiveness Mechanisms of Carbon Nanotubes (CNTs) as Reinforcements for Magnesium-Based Composites for Biomedical Applications: A Review
25/04/2024 -
As a smart implant, magnesium (Mg) is highly biocompatible and non-toxic. In addition, the elastic modulus of Mg relative to other biodegradable metals (iron and zinc) is close to the elastic modulus...
Natural and Synthetic Polymers for Biomedical and Environmental Applications
20/04/2024 -
Natural and synthetic polymers are a versatile platform for developing biomaterials in the biomedical and environmental fields. Natural polymers are organic compounds that are found in nature. The...
High-Performance, Easy-to-Fabricate, Nanocomposite Heater for Life Sciences and Biomedical Applications
20/04/2024 -
Microheaters are used in several applications, including medical diagnostics, synthesis, environmental monitoring, and actuation. Conventional microheaters rely on thin-film electrodes...
Pseudo-Eutectic of Isodimorphism to Design Biaxially-Oriented Bio-Based PA56/512 with High Strength, Toughness and Barrier Performances
22/04/2024 -
The biaxially-oriented PA56/512 has excellent mechanical strength, extensibility and water–oxygen barrier properties and has broad application prospects in green packaging, lithium...
Characterizing Surface Morphological and Chemical Properties of Commonly Used Orthopedic Implant Materials and Determining Their Clinical Significance
24/04/2024 -
The goal of the study was to compare the surface characteristics of typical implant materials used in orthopedic surgery and traumatology, as these determine their successful biointegration. The...
Effect of hybrid ratio on shape memory properties of graphene oxide?carbon/glass fiber composites prepared based on vacuum infiltration hot?press forming experimental system
22/04/2024 -
The hybrid ratio determines the penetration of the graphene oxide (GO)?containing resin solution, which changes the microstructure of the composites and further affects the shape memory properties of...
