Advanced materials
Advanced materials
Influence of Programming and Recovery Parameters on Compressive Behaviors of 4D Printed Bio?compatible PVC?PCL Blends
26/04/2024 -
This paper introduces a new class of bio?compatible shape memory polymers (SMPs) through blending PVC and PCL. The compressive shape?memory behaviors of 4D?printed SMP PVC with 5 and 10%wt of PCL are...
Influence of Metal Surface Structures on Composite Formation during Polymer–Metal Joining Based on Reactive Al/Ni Multilayer Foil
25/04/2024 -
During hybrid thermoplast metal joining with reacting Al/Ni foils, the structured metal surface influences crack initiation within the multilayer. Molten plastic penetrates the foil interface and...
Sustainable strategies towards better utilization of synthetic polymers
26/04/2024 -
The abstract provides an overview of a study focused on analyzing diverse strategies to achieve sustainable utilization of synthetic polymers through effective waste management. The escalating global...
Xanthene?Based Dyes for Photoacoustic Imaging and Their Use as Analyte?Responsive Probes
25/04/2024 -
Developing imaging tools that can report on the presence of disease?relevant analytes in multicellular organisms can provide insight into fundamental disease mechanisms as well as provide diagnostic...
Optimization of Ti-PA efficiently catalytic the alcoholysis of waste PET using response surface methodology
29/04/2024 -
A new type of titanium phthalate (Ti-PA) catalyst was prepared by exchange method of phthalic acid and isopropyl titanate, which is never been reported before. The Ti-PA catalyst was characterized...
Preparation, Air Filtration Performance of a Fluorinated Polyimide/Polyacrylonitrile Nanofibrous Membrane by Electrospinning
29/04/2024 -
This paper reports the successful fabrication of a new nanofibrous membrane, F-PI/PAN, through electrospinning of polyacrylonitrile (PAN) and fluorinated polyimide (F-PI). The nanofibrous membrane...
Study on the Properties of PLA- and PP-Based Films for Food Applications Incorporating Orange Peel Extract from Agricultural by-Products
29/04/2024 -
The aim of this work was to develop active packaging based on polypropylene (PP) and polylactic acid (PLA) matrices using a high value by-product extracted from orange peel as an active compound for...
Composite Nanomaterials Based on Polymethylmethacrylate Doped with Carbon Nanotubes and Nanoparticles: A Review
29/04/2024 -
Composite polymer materials have high strength and lightness, which makes them attractive for use in a variety of structures and products. The present article contains an overview of modern works...
Preparation and Performance Study of HTPB-g-(PNIPAM/PEG) Thermoresponsive Polymer Brush
29/04/2024 -
In recent years, a great deal of work has been devoted to the development of thermoresponsive polymers that can be made into new types of smart materials. In this paper, a branched polymer,...
Research on a Sensorless ADRC Vector Control Method for a Permanent Magnet Synchronous Motor Based on the Luenberger Observer
29/04/2024 -
A sensorless vector active disturbance rejection control (ADRC) method for permanent magnet synchronous motors (PMSM) utilizing a Luenberger observer is presented. This method aims to address the...
Spring?back of Al/CF/PEEK parts during one?step hot stamping forming using a CAE chain considering all process steps
25/04/2024 -
A Complete CAE chain of spring?back prediction for Al/CF/PEEK curved beam: the material mechanical properties, latent heat, thermal mismatch, and modulus mismatch during forming and cooling process...
Synthesis of fenugreek gum-based metal–organic framework (FG/Zr-AIPA MOF) composite beads for sequestration of heavy metal ions from aqueous solution
24/04/2024 -
Metal–organic frameworks (MOFs) are a prominent class of materials due to their large surface area and customized structures. This gives them specificity and high adsorption capacity while they...
Inhibiting stress corrosion cracking of a prefabricated surface?defective magnesium alloy thanks to biological organic components
18/04/2024 -
Biomedical magnesium (Mg) alloys remain a challenge for their mainstream application, because the combination of bio?mechanical stress and corrosive physiological environment leading to stress...
Advancement in ceramic biomaterials for dental implants
23/04/2024 -
There has been enormous research on diagnostic and therapeutic dental methods due to the growing recognition of oral wellness. Numerous studies in this area have resulted in dental biomaterials,...
Synergistic effect of gold nanoparticles decorated functionalized carbon nanotubes nanohybrids on the thermal, dielectric, and sensing properties of polyaniline ternary nanocomposites
23/04/2024 -
Synthesis preparation route of PEST?BU.AbstractIn the present study, a new polyionic liquid, PEST?BU, were synthesized and characterized using proton nuclear magnetic resonance, Fourier transform...
Thermally conductive high?voltage insulation composites with outstanding comprehensive properties through particle grading design
24/04/2024 -
Modification of discarded polypropylene mask and its utilization as crude oil flow improver.AbstractA method was investigated for the treatment and utilization of large quantities of polypropylene...
Text Mining and Multi-Attribute Decision-Making-Based Course Improvement in Massive Open Online Courses
25/04/2024 -
As the leading platform of online education, MOOCs provide learners with rich course resources, but course designers are still faced with the challenge of how to accurately improve the quality of...
Lignocellulosic-Based/High Density Polyethylene Composites: A Comprehensive Study on Fiber Characteristics and Performance Evaluation
24/04/2024 -
Lignocellulosic-based polymer composites have gained significant interest due to their ‘’green’’ character as a response to environmental...
Toward Self-Healing Coatings: Bacterial Survival and Calcium Carbonate Precipitation in Acrylic and Styrene–Acrylic Model Paint Films
24/04/2024 -
Engineered living materials (ELMs) incorporate living material to provide a gain of function over existing materials, such as self-repair. The use of bacteria in ELMs has been studied extensively in...
Pore Pressure Prediction for High-Pressure Tight Sandstone in the Huizhou Sag, Pearl River Mouth Basin, China: A Machine Learning-Based Approach
24/04/2024 -
A growing number of large data sets have created challenges for the oil and gas industry in predicting reservoir parameters and assessing well productivity through efficient and cost-effective...
Factors Affecting Silica/Cellulose Nanocomposite Prepared via the Sol–Gel Technique: A Review
23/04/2024 -
Cellulose/silica nanocomposites, synthesised through the sol–gel technique, have garnered significant attention for their unique properties and diverse applications. The distinctive...
