Materials

 

Materials

One?Step Synthesis of Closed?Loop Recyclable and Thermally Superinsulating Polyhexahydrotriazine Aerogels
04/11/2024 - The simple one?step synthesis of closed?loop recyclable PHT aerogels is presented, which are made from commercially available aromatic amines and PFA. These PHT aerogels display thermal...
Uniform Phase Permutation of Efficient Ruddlesden–Popper Perovskite Solar Cells via Binary Spacers and Single Crystal Coordination
12/10/2024 - By employing the FA derivative PFA cation and BA2MA4Pb5I16 single crystals, the 2D perovskite film exhibits a long carrier lifetime, a low exciton binding energy, and an orderly stepped?type...
Assessing the effectiveness of performic acid disinfection on effluents: focusing on bacterial abundance and diversity
18/09/2024 - Poorly-treated wastewater harbors harmful microorganisms, posing risks to both the environment and public health. To mitigate this, it is essential to implement robust disinfection techniques in...
The influence of mold design and process parameters on dimensional shrinkage of perfluoroalkoxy alkane injection molding parts
03/06/2024 - Hollow glass fiber embaded in silicone resin makes liner material. It was found that it has good life span and futher thermal stability is stablize by Arhinious modified model.AbstractLiner materials...
Effects of Electroporation on the Function of Sarco/Endoplasmic Reticulum Ca2+-ATPase and Na+,K+-ATPase in H9c2 Cells
22/03/2024 - Pulsed field ablation (PFA) is a promising new treatment for atrial fibrillation (AF), in which pulmonary vein isolation is achieved by irreversible electroporation. Electroporation causes ATP to...
Effect of Pouring Time on the Integrity of Pulverized Fuel Ash Concrete
06/02/2024 - The effects of pouring time intervals on the integrity of pulverized fuel ash (PFA) concrete were evaluated by measuring ultrasonic pulse velocity and compressive strength. Concrete was poured...
Effect of addition of fillers (MoS2 and PFA) on the tribological and mechanical properties of biobased semi?aromatic polyamide (PA10T)
16/01/2024 - This work synthesized biobased semi?aromatic polyamide PA10T and a series of wear?resistant PA10T?FM composites, with filler (MoS2 and PFA) contents varying from 0 to 10 wt.%. The results indicate...
Synthesis of Trifluoromethylated Monoterpenes by an Engineered Cytochrome P450
03/01/2024 - The carbene transfer reaction was realized in the biosynthetic pathway. Using L?limonene as the precursor, L?carveol was biotransformed by P411?PFA to generate unnatural terpenoid derivatives with...
Research on Compressive Strength of Manufactured Sand Concrete Based on Response Surface Methodology
29/12/2023 - Due to the impact of economic and social development on the environment, there is an increasing demand for manufactured sand to replace natural sand as fine aggregate for concrete. At the same time,...
Novel Effective Photocatalytic Self-Cleaning Coatings: TiO2-Polyfluoroalkoxy Coatings Prepared by Suspension Plasma Spraying
12/12/2023 - Photocatalytic coatings can degrade volatile organic compounds into non-toxic products, which has drawn the attention of scholars around the world. However, the pollution of dust on the coating...
Shaking Table Tests on Seismic Capacity Assessment of Basic Unit of Mineral Wool Ceilings Supported by Iron Sheet-Backed Painted Runners
16/10/2023 - Mineral wool ceilings supported by iron sheet-backed painted runners are commonly used in public buildings without specific seismic design intensity requirement, which is not good for resilient civil...
3D?printed alumina?based ceramics with spatially resolved porosity
25/08/2023 - Additive manufacturing of alumina with spatially resolved porosity by LCM. The interest on porous ceramics has increased in the last years with the developments in additive manufacturing methods,...
Cryogenic Mechanical Properties and Stability of Polymer Films for Liquid Oxygen Hoses
16/08/2023 - To select the appropriate polymer thin films for liquid oxygen composite hoses, the liquid oxygen compatibility and the cryogenic mechanical properties of four fluoropolymer films (PCTFE, ETFE, FEP...
Research on the Dynamic Characteristics of Perfluoroalkoxy Alkane Springs
27/07/2023 - Semiconductor cleaning system ultra-clean flow control pumps are critical equipment in the semiconductor industry. Among them, the perfluoroalkoxy alkane (PFA) spring is a pivotal component to...
Effects of a Natural Polyphenolic Product from Olive Mill Wastewater on Oxidative Stress and Post-Weaning Diarrhea in Piglets
05/07/2023 - The present study aimed to investigate the effects of a commercial phytogenic feed additive (PFA) on the prevention of post-weaning diarrhea and oxidative stress in piglets. The concentrations of...
A Sensor for Electrochemical pH Monitoring Based on Laser-Induced Graphene Modified with Polyfolate
02/06/2023 - A laser-induced graphene (LIG) modified with chitosan (Chit) and conducting polymer polyfolate (PFA) was used as a base to develop a flat and flexible pH sensor. LIGs were formed using two different...
Controllable cross?linking of VA?co?VAm/PAN composite membranes for efficient pervaporation desalination under extreme pH conditions
13/04/2023 - AbstractIn chip manufacturing, ultraclean environment is essential during wet processes such as etching, cleaning, and other stages. The fittings used in the process require corrosion resistance,...
Structural Variations in Biobased Polyfurfuryl Alcohol Induced by Polymerization in Water
31/03/2023 - Poly(furfuryl alcohol) is a thermostable biobased thermoset. The polymerization of furfuryl alcohol (FA) is sensitive to a number of side reactions, mainly the opening of the furan ring into carbonyl...
Effect of Zilpaterol Hydrochloride and Zinc Methionine on Growth, Carcass Traits, Meat Quality, Fatty Acid Profile and Gene Expression in Longissimus dorsi Muscle of Sheep in Intensive Fattening
15/03/2023 - Zilpaterol hydrochloride (ZH) redistributes ingested energy and improves feed efficiency by increasing muscle mass and reducing fat in sheep and cattle carcasses in fattening; however, by increasing...
Boiling Heat Transfer Characteristics of Porous Microchannel with Pore-Forming Agent
17/02/2023 - Traditional microchannel needs to face the flow-reversal difficulty in high heat fluxes due to limited space. It results in large pressure and temperature fluctuation. Porous microchannels arouse...
Development of robust superhydrophobic PFA/TMI/PVDF membrane by electrospinning/electrospraying techniques for air gap membrane distillation
25/01/2023 - A method for the synthesis of photo?induced organic–inorganic polymer hybrids utilizing the thiol?ene reaction in the sol–gel process is developed. Specifically, the thiol?ene reaction between...