Others
Others
Innovative Enhancement of Mechanical and Thermal Properties of Polylactic Acid Foam by Adjusting Crystallization
18/04/2025 -
This study investigates the regulation of PLA crystallization and foaming performance through the use of chain extenders and nucleating agents. The foam is subjected to annealing treatment to improve...
Study on the Effect of Annealing Temperature on the Forming and Mechanical Properties of Hot‐Pressed Ti/Al/Mg/Al/Ti‐Laminated Composites
06/04/2025 -
The research topic of this article is to study the effect of different annealing temperatures on the mechanical properties and formability of hot‐pressed Ti/Al/Mg/Al/Ti laminated composites. It is...
Fabrication and Three‐Point Bending Behavior of Aluminum Foam Sandwich via Controlled Atmosphere Brazing
06/04/2025 -
This study employs controlled atmosphere brazing method to fabricate aluminum foam sandwiches with metallurgical bonding interfaces. The filler materials partially wrap around the cell walls,...
Design and Evaluation of 3D‐Printed Polylactic Acid Composites Reinforced with Biodegradable Bamboo Powder and Jute Powder
28/03/2025 -
The study investigates 3D‐printed polylactic acid (PLA) composites with biodegradable bamboo and jute powder fillers. Mechanical, thermal, structural properties, and rheological behavior are...
The development of thyroid autoimmunity is potentially associated with the deficiency of vitamin D3 rather than vitamin D2 in euthyroid men
17/03/2025 -
The utilization of waste residues for soil amelioration is becoming increasingly popular in the construction industry due to its potential for effective waste management and resource utilization....
Development and Characterization of Starch‐Based Chitosan Reinforced Composite for Food Packaging Application
05/03/2025 -
ABSTRACTThis study considers the development of composite from biodegradable bioplastic obtained from waste starch reinforced with chitosan obtained from snail shells. About 30 g of the starch,...
Microstructure Analysis and Mechanical Performance of TA10/6061 Large Size Explosive Welding Composite Pipes Based on Numerical Simulation Verification
21/02/2025 -
AUTODYN is employed to simulate the dynamic collision process of the large‐size TA10/6061 composite pipe explosive welding. Using micro‐test, mechanical test and fracture analysis to evaluate the...
Microstructure, Mechanical Properties, and Antibacterial Performance of Novel Fe‐Mn‐Zn Nanocrystalline Alloys Produced by Mechanical Alloying
19/02/2025 -
This article presents the development of Fe‐Mn‐Zn nanocrystalline alloys (0–9 wt% Zn) by mechanical alloying and subsequently hot pressing. Their microstructure, density, hardness, wear...
Tailored Nickel Base Multilayer Systems with Adjusted Grain Size and Chemical Composition
07/02/2025 -
Nickel base multilayer systems are fabricated with pulsed electrodeposition and adjusted according to grain size and copper content. The material is characterized with scanning electron microscopy in...
Transparent Peelable Films with Ultrawear Resistant and Anti‐Ice Functionalities Fabricated via Magnetron Sputtering and Vacuum Plasma Processes
30/01/2025 -
The fabrication of transparent hydrophobic protective peelable film using a combined process of spraying, magnetron sputtering, and plasma etching is shown. The film offers a very long ice delay...
Microstructural Evolution and Properties of ZrB2‐Reinforced AA6111 Aluminum Matrix Composites Subjected to Double‐Sided Friction Stir Processing
29/01/2025 -
To address the issue of microstructural and property nonuniformity in single‐sided friction stir processing (FSP), double‐sided FSP (D‐FSP) of ZrB2‐reinforced AA6111 aluminum matrix...
Hybrid Preceramic Aerogels for Oil and Solvent Cleanup
22/01/2025 -
This study introduces monolithic hybrid aerogels. Despite differing drying methods, materials, processed as polymeric and ceramic‐polymer hybrids, exhibit high porosity (90 vol%) and high...
Synthesis, Structural, and Mechanical Properties of Alumina–Yttria‐Stabilized Zirconia Nanocomposites for Prospective Dental Ceramics
02/01/2025 -
Yttria‐tetragonal‐stabilized zirconia (YSZ) and alumina are mixed by mechanosynthesis and sol–gel method to prepare alumina‐toughened zirconia nanocomposites. Different amounts of alumina...
High‐Temperature Oxidation Behavior and Grinding Performance of CoCrFeMnNi High‐Entropy Alloy
20/12/2024 -
The additive manufacturing technique is employed to create the CrMnFeCoNi alloy, and the high‐temperature oxidation behavior and processing performance are discussed. The results of oxidation tests...
Enhancing Corrosion Resistance and Mechanical Strength of 3D‐Printed Iron Polylactic Acid for Marine Applications via Laser Surface Texturing
20/12/2024 -
Laser surface texturing significantly improves the corrosion resistance and mechanical strength of 3D‐printed iron polylactic acid (Ir‐PLA) for marine applications. Optimal laser parameters...
From Damage to Functionality: Remanufacturing of Thrust Roller Bearings by Tailored Forming
19/12/2024 -
Herein, the wear and fatigue behavior of repaired bearing raceways with a new powder alloy is investigated using a FE8 test‐rig and an oscillating tribometer. The tests are compared with industrial...
Synthesis of Copper Matrix Hybrid Composites with Boron‐, Nitrogen‐, and Silicon‐Doped Reduced Graphene Oxide by Hot Press Technique: Investigation of Tribological, Mechanical, and Electrical Conductivity Properties
05/12/2024 -
When the literature is examined, it is seen that the tribological properties of copper (Cu) matrix composites are widely developed. However, since a reinforced hybrid composite is been prepared and...
Thermal Shock Damage and Failure Mechanism of 2D Laminated SiC/SiC with Barium‐Strontium Aluminosilicate‐Based Environmental Barrier Coating
01/12/2024 -
The thermal shock damage behavior of SiC/SiC‐EBC is systematically investigated. Coating cracking or even peeling occurs due to thermal stress mismatch, which acts as channels for oxygen, leading...
Impact of Infill Density and Glass Fiber Reinforcement on the Compressive and Bending Strength of Acrylonitrile Butadiene 3D‐Printed Corrugated Sandwich Panels
27/11/2024 -
This study introduces a novel approach in additive manufacturing for creating high‐strength, lightweight corrugated sandwich panels with acrylonitrile butadiene styrene‐reinforced by glass...
Combining Micro and Macro Relative Density: An Experimental and Computational Study on Hierarchical Porous 3D‐Printed Polylactic Acid Structures
23/11/2024 -
This article investigates foamed fused filament fabrication of polylactic acid cellular solids using a filament containing chemical blowing agents. Structures with body centered cubic and triply...
Multi-Scale Mechanical Behavior of Liquid Elium® Based Thermoplastic Matrix Composites Reinforced with Different Fiber Types: Insights from Fiber–Matrix Adhesion Interactions
19/11/2024 -
Elium® liquid thermoplastic resin, with room-temperature curing and recyclability, enables large-scale production. However, limited research exists on the fiber–matrix interface, and...
