Others

 

Others

Analysis of Mechanical Properties and Thermal Conductivity of Thin-Ply Laminates in Ambient and Cryogenic Conditions
06/11/2024 - It is widely known that glass–epoxy laminates are renowned for their high stiffness, good thermal properties, and economic qualities. For this reason, composite materials find...
New Materials from the Integral Milk Kefir Grain Biomass and the Purified Kefiran: The Role of Glycerol Content on the Film’s Properties
05/11/2024 - Microbial exopolymers are gaining attention as sources for the development of biodegradable materials. Milk kefir, a fermented dairy product produced by a symbiotic community of microorganisms,...
Effect of Heat Treatment on Mechanical Properties and Thermal Expansion of Al6063-SiC-Graphite, Molybdenum Disulfide Hybrid Composite
07/11/2024 - The effect of casting and T6 heat treatment at 540 °C for 3 h, quenching in water, heating to 180 °C for 4 h and cooling at room temperature on the mechanical properties and...
Understanding on the Correlation between Mechanical Properties and Thermal Conductivity of Hot?Forged Copper/Diamond Composites
01/11/2024 - This article investigates the mechanical properties of hot?forged copper/diamond composites to understand their interfacial bonding, crucial for optimizing thermal conductivity. Through tensile and...
Fixation of Tripotassium Citrate Flame Retardant Using a Sorbitol and Citric Acid Wood-Modification Treatment
04/11/2024 - Wood modification has been explored in various ways to enhance dimensional stability and reduce flammability, with a focus on environmentally friendly treatments to meet market demands. This study...
Evaluation of Thermal and Mechanical Properties of Bi-In-Sn/WO3 Composites for Efficient Heat Dissipation
31/10/2024 - Phase change materials (PCMs) offer promising solutions for efficient thermal management in electronic devices, energy storage systems, and renewable energy applications due to their capacity to...
The Input of Nanoclays to the Synergistic Flammability Reduction in Flexible Foamed Polyurethane/Ground Tire Rubber Composites
31/10/2024 - Currently, postulated trends and law regulations tend to direct polymer technology toward sustainability and environmentally friendly solutions. These approaches are expressed by keeping materials in...
Hygrothermal aging behavior of C/GFRP hybrid rod with bundle?by?bundle dispersion
28/10/2024 - Hygrothermal aging behavior of C/GFRP hybrid rod.Fiber hybrid with bundle?by?bundle dispersion can achieve the high performance of composites, fully understand the hybrothermal resistance of hybrid...
Hollow glass microsphere/polybutadiene composites with low dielectric constant and ultralow dielectric loss in high?frequency
27/10/2024 - By mixing plasticized polyvinyl chloride and hydrogenated nitrile?butadiene rubber blends with inorganic fillers including fumed silica, magnesium hydroxide and antimony trioxide, composites with...
Hybrid Geopolymer Composites Based on Fly Ash Reinforced with Glass and Flax Fibers
26/10/2024 - This article’s aim is to analyze physical, mechanical, and fracture properties as well as the thermal investigation of geopolymer composites reinforced with flax, glass fiber, and also...
Synergistic Reinforcing Effect of Hazelnut Shells and Hydrotalcite on Properties of Rigid Polyurethane Foam Composites
23/10/2024 - Recently, the development of composite materials from agricultural and forestry waste has become an attractive area of research. The use of bio-waste is beneficial for economic and environmental...
Glass fiber waste as a potential bitumen modifier and stabilizing agent in asphalt mixture
20/10/2024 - The deterioration of Malaysia’s flexible road pavements due to rutting and moisture damage presents a critical problem. Meanwhile, disposing of glass fiber wastes from manufacturing process...
The effect of rubber and plastic mass ratio on the compatibilized ethylene propylene diene monomer/polypropylene TPV with shape memory behavior
19/10/2024 - Schematic showing the fabrication of graphite?tailings and calcium alginate (GT@CA) coatings on polyurethane foam (PUF) and the proposed flame?retardant and smoke?suppression mechanism of GT@CA on...
Flammability and Mechanical Testing of Sandwich Composite for Rolling Stock Structural Applications
21/10/2024 - Components made of composite materials are being increasingly used in the construction of rolling stock. Currently, the use of components made of composite materials as train structural elements is...
Physical, Mechanical, and Flammability Properties of Wood–Plastic Composites (WPC) Containing Beech-Wood Flour and Flame-Retardant Additives
21/10/2024 - This study aims to develop a recyclable, economical, and flame-retardant composite material using polypropylene, beech flour, tetrabromobisphenol A bis (TBBPA), and antimony trioxide (ATO)....
A high?entropy (Er0.25Y0.25Ho0.25Yb0.25)2Si2O7 ceramic with good thermal properties and water?vapor corrosion resistance
15/10/2024 - A high?entropy rare?earth disilicate (Er0.25Y0.25Ho0.25Yb0.25)2Si2O7 (hereinafter referred to as (EYHY)2Si2O7) ceramic was synthesized by a heat treatment process combined with spark plasma...
Investigation of microcapsules based self-healing composites embedded with carbon nanotubes for improved healing efficiency
15/10/2024 - Abstract Self-healing composites are smart materials that can self-detect and prevent micro crack propagation and any catastrophic failure in the composite structure. In this...
Effect of Star-like Polymer on Mechanical Properties of Novel Basalt Fibre-Reinforced Composite with Bio-Based Matrix
16/10/2024 - This study is aimed at developing a fibre-reinforced polymer composite with a high bio-based content and to investigate its mechanical properties. A novel basalt fibre-reinforced polymer (BFRP)...
Study on Thermal Chamber Expansion of VH-SAGD Process Using CO2-Inducing Effect for Heavy Oil Reservoirs
16/10/2024 - In heavy oil thermal recovery processes, higher pressure usually leads to low dryness and expansion difficulty for the injected steam in thermal recovery processes, which will result in lower oil...
Enhanced Interfaces for High-Temperature Purposes—Practical Methodology and Characterization
17/10/2024 - The current study is focused on devising treated diatomite interfaces with the robustness and boiling water resistance necessary for high-temperature purposes. This work describes the synthesis...
A facile in-situ strategy to fabricate lightweight carbon fiber/silicone-phenolic aerogel composites with superior toughness and ablation performance
08/10/2024 - Abstract The development of lightweight carbon fiber/phenolic ablator plays a vital role in advancements of space technology. However, the complex fabrication process and inherent...