Packaging
Packaging
Integrating Electrochemically Grown Nano?Oxide and Polymer Films for Electrochromic Device: Achieving NIR Shielding & Four?Digit Efficiency
24/04/2024 -
Electrochemically deposited thin films yield high uniformity, a property which is quite vital to in the context of electrochromic coatings and devices. Tungsten oxide and polyaniline are two such...
The simultaneous removal of methylene blue (MB) and Ca2+ by recyclable adsorbents based the scales derived from coal gasification system
24/04/2024 -
The transformation of solid wastes from industrial production into effective adsorbents could significantly contribute to wastewater treatment. In this study, after acidizing and burning soft...
Inhibiting stress corrosion cracking of a prefabricated surface?defective magnesium alloy thanks to biological organic components
18/04/2024 -
Biomedical magnesium (Mg) alloys remain a challenge for their mainstream application, because the combination of bio?mechanical stress and corrosive physiological environment leading to stress...
Preparation, structure, and properties of biodegradable core?sheath composite fibers derived from poly (butylene adipate?co?terephthalate) and polylactic acid
23/04/2024 -
Fluorescence of EBS?g?MA/CDs NanocompositesAbstractCarbon dots (CDs) are an interesting nanomaterial due to their tunable photoluminescence and other functional properties. Herein, by introducing...
Corrosion protection of photocured coatings containing highly crosslinked SU-8 epoxy resin
22/04/2024 -
AbstractIn this study, a series of photocured epoxied films (SAU-0, SAU-5, SAU-10 and SAU-15) were prepared and applied to the galvanized steel surface for corrosion...
Keratin-modified waterborne polyurethane: an alternative circular economy technology for adding value to cattle hair waste from leather tanneries
24/04/2024 -
AbstractWaterborne polyurethane (WPU) has excellent performance because of its special soft and hard segments in polymer chains, but the relatively high cost, poor water vapor permeability, and...
Synthesis and characterization of a Dion–Jacobson two-dimensional perovskite
22/04/2024 -
Abstract Two-dimensional (2D) metal halide perovskites feature several specific advantages over others 2D materials, such as facile wet chemical synthesis and layers...
Synthesis of low-temperature irreversible thermochromic indicator based on functional polydiacetylene for food storage applications
21/04/2024 -
Abstract Thermochromic materials are of great interest because of their color transition characteristic as a function of temperature, and this property may find potential...
Effect of CH4 concentration on the early growth stage of patterned diamond using high seeding density and hot filament chemical vapor deposition
18/04/2024 -
Abstract A bottom-up method is described to grow patterned polycrystalline diamond on silicon substrates using polymer assisted seeding and photolithography. Diamond seeding...
Assessment of the Development Performance of Additive Manufacturing VPP Parts Using Digital Light Processing (DLP) and Liquid Crystal Display (LCD) Technologies
24/04/2024 -
Non-metallic additive manufacturing technology has seen a substantial improvement in the precision of the parts it produces. Its capability to achieve complex geometries and very small dimensions...
Synthesis and Electrical Properties of a New Bipolar Material Using Spacer Moiety
24/04/2024 -
To develop a deep-blue emitter, a molecule with bipolar characteristics was designed as a donor-spacer-acceptor type, in which 9-(4-(4,6-diphenyl-1),3,5-triazin-2-yl)-2,5-dimethylphenyl)-9H-carbazole...
Mechanical Properties of Fire-Damaged RC Beams Reinforced with Carbon Fiber Mesh
20/04/2024 -
The bearing capacity of reinforced concrete (RC) beam will be weakened by fire. It is necessary to strengthen RC beams after fire. The carbon fiber mesh (CFM) can be used to reinforce RC beams. In...
Toward Self-Healing Coatings: Bacterial Survival and Calcium Carbonate Precipitation in Acrylic and Styrene–Acrylic Model Paint Films
24/04/2024 -
Engineered living materials (ELMs) incorporate living material to provide a gain of function over existing materials, such as self-repair. The use of bacteria in ELMs has been studied extensively in...
Plasma Bombardment-Induced Amorphization of (TiNbZrCr)Nx High-Entropy Alloy Nitride Films
19/04/2024 -
The (TiNbZrCr)Nx high-entropy nitride films (HENFs) were prepared by high-power pulsed magnetron sputtering (HPPMS). The effect of the N2 flow rate (FN) on the HPPMS plasma discharge, film...
Nitrogen-Doped Diamond-like Carbon Buffer Layer Enhances the Mechanical and Tribological Properties of Diamond-like Carbon Films Deposited on Nitrile Rubber Substrate
21/04/2024 -
The poor adhesion between the DLC film and rubber restricts its application of seals. Introducing a suitable interlayer can bolster the adhesion of the coating or film. In this study, nitrogen-doped...
Ternary Holey Carbon Nanohorn/Potassium Chloride/Polyvinylpyrrolidone Nanohybrid as Sensing Film for Resistive Humidity Sensor
22/04/2024 -
The study presents findings on the relative humidity (R.H.) sensing capabilities of a resistive sensor. This sensor utilizes sensing layers composed of a ternary nanohybrid, consisting of holey...
Utilizing Metal Oxide Thin Films for Device Engineering of Solution-Processed Organic Multi-Junction Solar Cells
24/04/2024 -
Electron and hole transporting layers play a major role in high-performance and stable organic-based optoelectronic devices. This paper demonstrates detailed device engineering of multi-junction...
Anticorrosion Method Combining Impressed Current Cathodic Protection and Coatings in Marine Atmospheric Environment
24/04/2024 -
In this study, a new anticorrosion method combining impressed current cathodic protection (ICCP) with coatings that can be applied to marine atmospheric environments is proposed. As the corrosion...
Fabrication of Nanostructures Consisting of Composite Nanoparticles by Open-Air PLD
24/04/2024 -
We present a two-step physical method for the fabrication of composite nanoparticle-based nanostructures. The proposed method is based on the pulsed laser deposition (PLD) technique performed...
Sustainable and Cost-Efficient Production of Micro-Patterned Reduced Graphene Oxide on Graphene Oxide Films
25/04/2024 -
This study tackles the critical demand for sustainable synthesis methods of reduced graphene oxide (rGO), highlighting the environmental drawbacks of conventional chemical processes. We introduce a...
Pragmatic Carbohydrate Quality Metrics in Relation to Glycemic Index, Glycemic Load, and Front-of-Pack Warning Labels in Grain Foods
24/04/2024 -
The challenges in the characterization of the nutritional quality of grain foods comprise obstacles to public health actions toward promotion of healthier grain-based foods. The present study...
